M38207E8FP Datasheet, PDF (54/66 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

MITSUBISHI MICROCOMPUTERS
3820 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
ELECTRICAL CHARACTERISTICS (Extended Operating Temperature Version)
(VCC =2.5 to 5.5 V, Ta = –20 to 85 °C, and VCC =3.0 to 5.5 V, Ta = –40 to –20 °C, unless otherwise noted.)
Symbol
Parameter
Test conditions
Limits
Unit
Min. Typ. Max.
IOH = –2.5 mA
VCC–2.0
V
VOH
“H” output voltage P00–P07, P10–P17, P30–P37 IOH = –0.6 mA
VCC = 3.0 V
VCC–0.9
V
IOH = –5 mA
VCC–2.0
V
“H” output voltage P20–P27, P41–P47,P50–P57, IOH = –1.25 mA
VCC–0.5
V
VOH
P60, P61, P70, P71 (Note)
IOH = –1.25 mA
VCC–0.9
V
VCC = 3.0 V
IOL = 5 mA
2.0
V
IOL = 1.25 mA
VOL
“L” output voltage P00–P07, P10–P17, P30–P37
IOL = 1.25 mA
VCC = 3.0 V
0.5
V
1.1
V
IOL = 10 mA
2.0
V
VOL
VT+ – VT–
VT+ – VT–
VT+ – VT–
“L” output voltage P20–P27, P41–P47, P50–P57,
P60, P61, P70, P71 (Note)
Hysteresis
Hysteresis
Hysteresis
CNTR0, CNTR1, INT0–INT3, P20–P27
RXD, SCLK1, SIN2, SCLK2
RESET
IOL = 2.5 mA
IOL = 2.5 mA
VCC = 3.0 V
RESET: VCC=3.0 V to 5.5 V
VI = VCC
Pull-downs “off”
0.5
V
1.1
V
0.5
V
0.5
V
0.5
V
5.0 µA
VCC= 5.0 V, VI = VCC
IIH
“H” input current P00–P07, P10–P17, P30–P37
Pull-downs “on”
30
70
170
µA
VCC= 3.0 V, VI = VCC
Pull-downs “on”
IIH
“H” input current
P20–P27, P40–P47, P50–P57,
P60, P61, P70, P71
VI = VCC
IIH
“H” input current RESET
VI = VCC
IIH
“H” input current XIN
VI = VCC
6.0
25
55
µA
5.0 µA
5.0 µA
4.0
µA
IIL
“L” input current P00–P07, P10–P17, P30–P37,
P40, P70
VI = VSS
Pull-ups “off”
–5.0 µA
–5.0 µA
“L” input current P20–P27, P41–P47, P50–P57, VCC= 5.0 V, VI = VSS
IIL
P60, P61, P71
Pull-ups “on”
–30
–70 –140
µA
VCC= 3.0 V, VI = VSS
Pull-ups “on”
–6
–25 –45 µA
IIL
“L” input current RESET
IIL
“L” input current XIN
VI = VSS
VI = VSS
–4.0
–5.0 ^µA
µA
VRAM
RAM hold voltage
When clock is stopped
2.0
5.5
V
Note : When “1” is set to port XC switch bit (bit 4 of address 003B16) of CPU mode register, the drive ability of port P70 is different from the
value above mentioned.
54