HAL-APB-V1.5 Datasheet, PDF (6/59 Pages) Micronas – Application Board HAL-APB V1.x

HAL1820, HAL24xy, HAL28xy, HAL36xy, HAL38xy
Application Board HAL-APB V1.x
APPLICATION NOTE
Release Note:
Revision bars indicate significant changes to the previous edition.
1. Introduction
1.1. General Information
The hardware and software description in this document is valid for the Application
Board HAL-APB V1.x.
Fig. 1–1: Application Board HAL-APB V1.x
1.2. Introduction
The Application Board HAL-APB V1.x (HAL-APB) is an board for programming the
Micronas Hall-effect sensor families with analog and digital output formats. The board
is equipped with a Micronas Flash micro controller CDC 3207G. It provides an applica-
tion software supporting a command interface for the communication with a PC. This
allows the implementation of specific PC software for engineering purposes or in-line
calibration. The HAL-APB can be ordered with a housing or as a PCB version.
In the case of a housing, an additional extension board with two sockets for the connec-
tion of up to two Hall sensors (depending on the sensor type) is supplied.
Two versions of the Application Board HAL-APB are in use: version 1.3 and the
updated version 1.5. Both versions are free to be used in laboratories for engineering
purposes.
Note: For usage in the production, board version 1.5 is mandatory.
6
Oct. 8, 2012; APN000055_003EN
Micronas