HAL-APB-V1.5 Datasheet, PDF (17/59 Pages) Micronas – Application Board HAL-APB V1.x

APPLICATION NOTE
HAL1820, HAL24xy, HAL28xy, HAL36xy, HAL38xy
Application Board HAL-APB V1.x
5. USB Driver Installation
Note: When using the serial cable you do not need to install this drivers. They are only
necessary for connecting the Application Board HAL-APB V1.x via USB cable to
the PC.
5.1. Installing the USB VCP Drivers
Plug in the Application Board HAL-APB V1.x (Power supply also connected) into a
spare USB port and plug in the power supply.
Windows 7 will automatically search latest driver if the PC is connected to the internet.
If there are problems with the installation follow the application note:
“AN_119_FTDI_Drivers_Installation_Guide_for_Windows7.pdf”
The application note: “AN_104_FTDI_Drivers_Installation_Guide_for_WindowsXP.pdf”
can be used to install the driver on a windows xp system.
The application note can be either found on the Micronas Service Portal
(https://service.micronas.com/workgroups/) or on the FTDI homepage.
Note: Sometimes the installer repeats the whole procedure. If this happens please do
the same as explained above again.
Micronas
Oct. 8, 2012; APN000055_003EN
17