HAL-APB-V1.5 Datasheet, PDF (16/59 Pages) Micronas – Application Board HAL-APB V1.x

HAL1820, HAL24xy, HAL28xy, HAL36xy, HAL38xy
Application Board HAL-APB V1.x
APPLICATION NOTE
4.4. Characteristics
All voltages are referenced to GND (-VB pin at X1 = GND at X2)
Table 4–7: Board characteristics
Symbol
I_{SUP_HAL}
Parameter
Output Load Current
Connector Limit Values
Min. Typ.
HAL1/2
-
-
V_{OUT_HAL}
Output Voltage of Hall
Device
HAL1/2
0
-
0
V_{SUP_HAL_NORM} NORM Level of HAL Supply HAL 1/2
4.9
5
Voltage
V_{SUP_HAL_LOW} LOW Level of HAL Supply HAL 1/2
5.8
6.0
Voltage
V_{SUP_HAL_HIGH} HIGH Level of HAL Supply HAL 1/2
6.8
7.3
Voltage
Max.
40
5
18
5.1
Unit Test Conditions
mA Supply current per
device
V
Standard configuration
(default)
V
LIN configuration only!
V
6.6
V
7.8
V
Note: The voltage levels are trimmed by the manufacturer. If any of the levels listed are
found to be outside the specification limits, please contact the manufacturer or
the Application Support Sensors Team.
The RS232 cable should be a standard serial cable. Also called straight cable.
16
Oct. 8, 2012; APN000055_003EN
Micronas