HAL-APB-V1.5 Datasheet, PDF (14/59 Pages) Micronas – Application Board HAL-APB V1.x

HAL1820, HAL24xy, HAL28xy, HAL36xy, HAL38xy
Application Board HAL-APB V1.x
4. Specification
APPLICATION NOTE
4.1. Recommended Operating Conditions
All voltages are referenced to GND (-VB pin at X1 = GND at X2)
Table 4–5: Board conditions
Symbol Parameter
I_SUP
V_SUP
C_L
Supply Current
Supply Voltage
Load Capacitance
Connector
X2
X2
HAL1/2
Limit Values
Min.
Typ.
-
180
16
18
-
-
Max.
-
20
100
Unit Test Conditions
mA
V
nF
4.2. Recommended Wiring
We recommend connecting the application to the board using shielded wires.
In order to minimize the risk of electromagnetic disturbances, the cable should be as
short as possible.
Note: Especially in noisy environments beneath power switches, electromagnetic
actuators, and the like, EMI-compliant layout of the wiring is mandatory.
For recommended cable parameters, please refer to Table 4–6.
14
Oct. 8, 2012; APN000055_003EN
Micronas