HAL805 Datasheet, PDF (4/24 Pages) Micronas – Programmable Linear Hall Effect Sensor

HAL 805
PRELIMINARY DATA SHEET
1.3. Marking Code
The HAL 805 has a marking on the package surface
(branded side). This marking includes the name of the
sensor and the temperature range.
Type
HAL 805
Temperature Range
A
K
E
805A
805K
805E
1.4. Operating Junction Temperature Range (T_J)
The Hall sensors from Micronas are specified to the
chip temperature (junction temperature T_J).
A: TJ = −40 °C to +170 °C
K: TJ = −40 °C to +140 °C
E: TJ = −40 °C to +100 °C
The relationship between ambient temperature (T_A)
and junction temperature is explained in Section 4.5.
on page 18.
1.5. Hall Sensor Package Codes
HALXXXPA-T
Temperature Range: A, K, or E
Package: UT for TO-92UT
Type: 805
Example: HAL805UT-K
→ Type:
805
→ Package:
TO-92UT
→ Temperature Range: T_J = −40°C to +140°C
Hall sensors are available in a wide variety of packag-
ing versions and quantities. For more detailed informa-
tion, please refer to the brochure: “Ordering Codes for
Hall Sensors”.
1.6. Solderability
Package TO-92UT: according to IEC68-2-58
During soldering reflow processing and manual
reworking, a component body temperature of 260 °C
should not be exceeded.
Components stored in the original packaging should
provide a shelf life of at least 12 months, starting from
the date code printed on the package labels, even in
environments as extreme as 40 °C and 90% relative
humidity.
1.7. Pin Connections and Short Descriptions
Pin
Pin Name Type Short Description
No.
1
V_DD
IN
Supply Voltage and
Programming Pin
2
GND
Ground
3
OUT
OUT Push Pull Output
and Selection Pin
1 V_DD
OUT
3
2 GND
Fig. 1–1: Pin configuration
4
Micronas