MT28F322P3 Datasheet, PDF (24/36 Pages) Micron Technology – FLASH MEMORY

ABSOLUTE MAXIMUM RATINGS*
Voltage to Any Ball Except VCC and VPP
with Respect to VSS ............................. -0.5V to +4V
VPP Voltage (for BLOCK ERASE and PROGRAM
with Respect to VSS) ................. -0.5V to +13.5V**
VCC and VCCQ Supply Voltage
with Respect to VSS ............................. -0.3V to +4V
Output Short Circuit Current ............................... 100mA
Operating Temperature Range ............ -40^oC to +85^oC
Storage Temperature Range ............... -55^oC to +125^oC
Soldering Cycle .......................................... 260^oC for 10s
PRELIMINARY
2 MEG x 16
ASYNC/PAGE FLASH MEMORY
*Stresses greater than those listed under “Absolute
Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional
operation of the device at these or any other conditions
above those indicated in the operational sections of
this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may
affect reliability.
**Maximum DC voltage on VPP may overshoot to +13.5V
for periods <20ns.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Operating temperature
VCC supply voltage
I/O supply voltage
VPP voltage
VPP in-factory programming voltage
Block erase cycling
VPP = VPP1
VPP = VPP2
SYMBOL
t_A
VCC
VCCQ
VPP1
VPP2
VPP1
VPP2
NOTE: 1. VPP = VPP2 is a maximum of 10 cumulative hours.
MIN
-40
2.7
2.2
1.8
11.4
–
–
MAX
+85
3.3
3.3
3.3
12.6
100,000
100
UNITS
ºC
V
V
V
V
Cycles
Cycles
NOTE
1
2 Meg x 16 Async/Page Flash Memory
MT28F322P3FJ_3.p65 – Rev. 3, Pub. 7/02
24
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2002, Micron Technology, Inc.