|
LAN8710A Datasheet, PDF (82/82 Pages) SMSC Corporation – Small Footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR Technology | |||
|
◁ |
Small Footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR® Technology
Datasheet
Table 7.1 Customer Revision History (continued)
REVISION LEVEL & DATE SECTION/FIGURE/ENTRY
CORRECTION
Section 5.5.4, "MII Interface
Timing," on page 73
Corrected signal names on MII timing diagrams
and tables. Updated Table 5.8 tval max to 28.0 ns.
Updated Table 5.9 tsu and thold values to 12.0 ns
and 0 ns, respectively.
Table 5.7, âPower-On nRST
& Configuration Strap
Timing Values,â on page 72
Updated todad description: âOutput drive after
nRST deassertionâ
Rev. 1.1 (04-09-10)
Section 5.1, "Absolute
Maximum Ratings*"
Modified âHBM ESD Performance by adding âper
JEDEC JESD22-A114â and changed â+/-5kVâ to
âClass 3Aâ
Section 5.3, "Power
Consumption," on page 67
Section 5.3, "Power
Consumption," on page 67
Table 5.2, âNon-Variable I/O
Buffer Characteristics,â on
page 68
Corrected typo in the current consumption table
row title: â100BASE-TX /W TRAFFICâ
Corrected typo in note regarding Ethernet
component current:
âThe Ethernet component current is typically 41mA
in 100BASE-TX mode and 100mA in 10BASE-T
mode, independent of the 2.5V or 3.3V supply rail
of the transformer.â
Corrected O12 VOH minimum value to âVDD2A -
0.4â
Corrected ICLK VILI maximum value to â0.35â
Corrected ICLK VIHI maximum value to âVDD2A +
0.4â
Section 5.2, "Operating
Conditions**," on page 67
Added note: âDo not drive input signals without
power supplied to the device.â
Section 5.1, "Absolute
Maximum Ratings*," on
page 66
Corrected IEC61000-4-2 Contact Discharge ESD
Performance to +/-8kV.
Section 4.2.4, "PHY
Identifier 2 Register," on
page 55
Section 3.8.9.2, "Far
Loopback," on page 43
Section 4.2.8, "Mode
Control/Status Register," on
page 59
Corrected Model Number default value to
â001111bâ.
Added far loopback description.
Added FARLOOPBACK (bit 9) description.
Table 5.9, âMII Transmit
Corrected tsu and thold minimum values to 10 ns.
Timing Values,â on page 74
Rev. 1.0 (12-09-09)
Rev. 1.0 (04-15-09)
Document reworked for clarity and consistency with other SMSC documentation.
Initial Release
Revision 1.4 (08-23-12)
82
DATASHEET
SMSC LAN8710A/LAN8710Ai
|