MRF24J40MB-I Datasheet, PDF (41/156 Pages) Microchip Technology – IEEE 802.15.4™ 2.4 GHz RF Transceiver

MRF24J40
REGISTER 2-32: WAKECON: WAKE CONTROL REGISTER (ADDRESS: 0x22)
R/W-0
IMMWAKE
bit 7
R/W-0
REGWAKE
R/W-0
INTL
R/W-0
INTL
R/W-0
INTL
R/W-0
INTL
R/W-0
INTL
R/W-0
INTL
bit 0
Legend:
R = Readable bit
-n = Value at POR
r = reserved
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
bit 6
bit 5-0
IMMWAKE: Immediate Wake-up Mode Enable bit
1 = Enable Immediate Wake-up mode
0 = Disable Immediate Wake-up mode (default)
REGWAKE: Register Wake-up Signal bit
Host processor should set to ‘1’, then clear to ‘0’, to perform wake-up.
INTL<5:0>: Interval to Start Beacon⁽¹⁾
For Beacon-Enabled mode the timing interval between triggering slotted mode and the first time to
transmit beacon.
Default Value: 0x00.
Note 1: Refer to Section 3.8.1.4 “Configuring Beacon-Enabled PAN Coordinator” for more information.
© 2010 Microchip Technology Inc.
Preliminary
DS39776C-page 41