PIC16F684_07 Datasheet, PDF (153/192 Pages) Microchip Technology – 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers with nanoWatt Technology

PIC16F684
16.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES
The graphs and tables provided in this section are for design guidance and are not tested.
In some graphs or tables, the data presented are outside specified operating range (i.e., outside specified VDD
range). This is for information only and devices are ensured to operate properly only within the specified range.
Note:
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein are
not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore, outside the warranted range.
“Typical” represents the mean of the distribution at 25°C. “Maximum” or “minimum” represents
(mean + 3σ) or (mean - 3σ) respectively, where σ is a standard deviation, over each temperature range.
FIGURE 16-1:
TYPICAL IDD vs. FOSC OVER VDD (EC MODE)
3.5
Typical: Statistical Mean @25°C
3.0
Maximum: Mean (Worst Case Temp) + 3σ
(-40°C to 125°C)
2.5
5.5V
5.0V
2.0
4.0V
1.5
3.0V
1.0
2.0V
0.5
0.0
1 MHz
2 MHz
4 MHz
6 MHz
8 MHz
10 MHz 12 MHz 14 MHz 16 MHz 18 MHz 20 MHz
FOSC
© 2007 Microchip Technology Inc.
DS41202F-page 151