|
KSZ8081MNX Datasheet, PDF (1/66 Pages) Micrel Semiconductor – 10Base-T/100Base-TX Physical Layer Transceiver | |||
|
KSZ8081MNX/RNB
10BASE-T/100BASE-TX Physical Layer
Transceiver
Features
⢠Single-chip 10Base-T/100Base-TX IEEE 802.3
compliant Ethernet transceiver
⢠MII interface support (KSZ8081MNX)
⢠RMII v1.2 Interface support with a 50 MHz refer-
ence clock output to MAC, and an option to input
a 50 MHz reference clock (KSZ8081RNB)
⢠Back-to-back mode support for a 100 Mbps
copper repeater
⢠MDC/MDIO management interface for PHY
register configuration
⢠Programmable interrupt output
⢠LED outputs for link, activity, and speed status
indication
⢠On-chip termination resistors for the differential
pairs
⢠Baseline wander correction
⢠HP Auto MDI/MDI-X to reliably detect and correct
straight-through and crossover cable connections
with disable and enable option
⢠Auto-negotiation to automatically select the
highest link-up speed (10/100 Mbps) and duplex
(half/full)
⢠Power-down and power-saving modes
⢠LinkMD TDR-based cable diagnostics to identify
faulty copper cabling
⢠Parametric NAND Tree support for fault detection
between chip I/Os and the board
⢠HBM ESD rating (6 kV)
⢠Loopback modes for diagnostics
⢠Single 3.3V power supply with VDD I/O options
for 1.8V, 2.5V, or 3.3V
⢠Built-in 1.2V regulator for core
⢠Available in 32-pin (5 mm à 5 mm) QFN package
Applications
⢠Game console
⢠IP phone
⢠IP set-top box
⢠IP TV
⢠LOM
⢠Printer
ï£ 2016 Microchip Technology Inc.
DS00002202A-page 1
|
▷ |