EQCO30R5.D Datasheet, PDF (1/24 Pages) Microchip Technology – EQCO30R5.D 3G/HD-SDI Video Cable Equalizer

EQCO30R5.D
EQCO30R5.D 3G/HD-SDI Video Cable Equalizer
Features
• Supports up to 140 Meters of Cable at 2.97 Gbps
Using High-Quality Coax
• Supports up to 200 Meters of Cable at 1.485
Gbps Using High-Quality Coax
• Supports up to 450 Meters of Cable at 270 Mbps
Using High-Quality Coax
• Compatible with all SMPTE3G SDI data rates:
- SMPTE259M SDI, 143 to 360 Mbps
- SMPTE344M, 540 Mbps
- SMPTE292M HD-SDI, 1.485 Gbps
- SMPTE372M Dual-Link HD-SDI, 2.97 Gbps
- SMPTE424M Dual-Speed 3G-SDI, 2.97 Gbps
• Pin Compatible with Gennum and National
Semiconductor Parts
• Also Operates with 8B/10B Coding
• Single 3.3V Supply.
• Low Power Consumption (220 mW, 3.3V Supply;
80 mW, 1.2V Supply)
• Better Robustness Due to Transmit Amplitude
Independent Operation
• 16-Pin, 0.65 mm Pin Pitch, 4 mm QFN Package
• -40°C to +85°C Industrial Temperature Range
• Pb-Free and RoHS Compliant
Applications
• High Definition, High Frame Rate Pro-Video HD-SDI
Frame Store
• Surveillance, Industrial/Inspection, Medical
Video Inputs
• HDcctv Applications
Note:
The EQCO30R5 video equalizer can be
used in combination with the EQCO30T5
cable driver. This device is capable of
receiving the uplink signal whilst other key
parameters remain compliant to SMPTE
specifications. Please refer to the
Microchip web site (www.microchip.com)
for the EQCO30T5 data sheet.
Introduction
The EQCO30R5 is a video equalizer for 3G/HD/SD-SDI
video, with speeds up to 2.97 Gbps. It is designed to be
a direct replacement for competing video equalizers. In
addition to downlink functionality from camera to frame
grabber, it can also transmit a 5 Mbps uplink signal from
the frame grabber to the camera. Additionally, power
can be provided over the same cable using the same
chip and a few external components. The device
operates with 8B/10B coded signals up to 3.125 Gbps.
 2011-2016 Microchip Technology Inc.
DS60001304B-page 1