KSZ8895MLU_11 Datasheet, PDF (99/110 Pages) Micrel Semiconductor – Integrated 5-Port 10/100 Managed Switch

Micrel, Inc.
Absolute Maximum Ratings⁽¹⁾
Supply Voltage
(V_DDAR, V_DDAP, V_DDC) .........................–0.5V to +2.4V
(V_DDAT, V_DDIO) ...................................–0.5V to +4.0V
Input Voltage ..........................................–0.5V to +4.0V
Output Voltage .......................................–0.5V to +4.0V
Lead Temperature (soldering, 10 sec.)............... 260°C
Storage Temperature (T_S).................. –55°C to +150°C
HBM ESD Rating .................................................1.5KV
KSZ8895MLU
Operating Ratings⁽²⁾
Supply Voltage
(V_DDAR, V_DDAP, V_DDC)........................ +1.15V to +1.25V
(V_DDAT) ............................................ +3.15V to +3.45V
(V_DDIO) .. 3.15 to 3.45V or 2.4 to 2.6V or 1.71 to 1.89V
Ambient Temperature (T_A)
Industrial ............................................–40°C to +85°C
Package Thermal Resistance⁽³⁾
LQFP (θ_JA) No Air Flow .............................41.54°C/W
LQFP (θ_JC) No Air Flow..............................19.78°C/W
Electrical Characteristics^{(4, 5)}
V_IN = 1.2V/3.3V (typ.); T_A = 25°C.
Symbol Parameter
Condition
Min.
Typ.
Max.
Units
100BASE-TX Operation—All Ports 100% Utilization
I_DX
100BASE-TX (Transmitter) 3.3V Analog V_DDAT
I_Dda
100BASE-TX 1.2V Analog
V_DDAR
I_DDc
100BASE-TX 1.2V Digital
V_DDC
I_DDIO
100BASE-TX (Digital IO) 3.3V Digital
V_DDIO
10BASE-T Operation —All Ports 100% Utilization
I_DX
10BASE-T (Transmitter) 3.3V Analog
V_DDAT
I_Dda
10BASE-T 1.2V Analog
V_DDAR
I_DDc
I_DDIO
10BASE-T 1.2V Digital
10BASE-T (Digital IO) 3.3V Digital
V_DDC
V_DDIO
Auto-Negotiation Mode
I_DX
10BASE-T (Transmitter) 3.3V Analog
V_DDAT
I_Dda
10BASE-T 1.2V Analog
V_DDAR
I_EDM
10BASE-T 1.2V Digital
V_DDC
I_DDIO
10BASE-T (Digital IO) 3.3V Digital
V_DDIO
Power Management Mode
I_PSM1
Power Saving Mode 3.3V
V_DDAT + V_DDIO
I_PSM2
I_SPDM1
I_SPDM2
Power Saving Mode 1.2V
Soft Power Down Mode 3.3V
Soft Power Down Mode 1.2V
V_{DDAR + VDDC}
V_DDAT + V_DDIO
V_{DDAR + VDDC}
I_EDM1
I_EDM2
Energy Detect Mode 3.3V
Energy Detect Mode 1.2V
V_DDAT + V_DDIO
V_{DDAR + VDDC}
129
mA
40
mA
45
mA
2.5
mA
124
mA
15
mA
56
mA
2
mA
75
mA
39
mA
58
mA
1.6
mA
38
mA
73
mA
1.6
mA
0.8
mA
7.5
mA
46
mA
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating. Unused inputs must always be tied to an appropriate logic voltage level (ground
or VDD).
3. No heat spreader in package. The thermal junction to ambient (θ_JA) and the thermal junction to case (θ_JC) are under air velocity 0m/s.
4. Specification for packaged product only. There is no an additional transformer consumption due to use on chip termination technology with internal
biasing for 10Bese-T and 100Base-TX.
5. Measurements were taken with operating ratings.
October 2011
99
M9999-100311-1.1