MIC3003GFL Datasheet, PDF (71/74 Pages) Micrel Semiconductor – FOM Management IC with Internal Calibration

Micrel, Inc.
Byte
3
2
1
0
Weight
POHA, high-byte
POHA, low-byte
POHB, high-byte
POHB, low-byte
MIC3003GFL
Default value
Serial address
Byte addresses
OEM Scratchpad Registers (SCRATCHn)
0000 0000b = 00h
A6h
136 - 207 (88 - CF_h)
208 - 221 (D0 - DD_h): This area is part of the OEM scratch pad only if the hard-
coded delimiters option for receive power linearization is used.
222 - 250 (DE - FA_h)
The scratchpad registers are general-purpose non-volatile memory locations. They can be freely read from and written to any
time the MIC3003 is in OEM mode.
RX Power Coefficient Look-up Table (RXLUTn)
Default values
Serial address
Byte addresses
Offset coefficients are set to a default value of zero
Slope coefficients are set to a default value of 1.0
A6h
40 - 71 = 28h - 47h
These registers hold the receive power slope and offset coefficients used to calibrate the MIC3003’s ADC receive power result
in internal calibration mode.
These registers are non-volatile and will be maintained through power and reset cycles. A valid OEM password is required for
access to these registers.
A6 Address
40 (28h)
41 (29h)
42 (2Ah)
43 (2Bh)
44 (2Ch)
45 (2Dh)
46 (2Eh)
47 (2Fh)
68 (44h)
69 (45h)
70 (46h)
71 (47h)
July 2010
Bytes
RXSLP0h
RXSLP0l
RXOFF0h
RXOFF0l
RXSLP1h
RXSLP1l
RXOFF1h
RXOFF1l
•
•
•
RXSLP7h
RXSLP7l
RXOFF7h
RXOFF7l
RX slope 0, high byte
RX slope 0, low byte
RX offset 0, high byte
RX offset 0, low byte
RX slope 1, high byte
RX slope 1, low byte
RX offset 1, high byte
RX offset 1, low byte
•
•
•
RX slope 7, high byte
RX slope 7, low byte
RX offset 7, high byte
RX offset 7, low byte
71
Definition
M9999-072910-A
[e-mail] or [phone]