MIC3003GFL Datasheet, PDF (51/74 Pages) Micrel Semiconductor – FOM Management IC with Internal Calibration

Micrel, Inc.
MIC3003GFL
Warning Flags
Warning Status Register 0 (WARN0)
D[7]
W7
read-only
D[6]
W6
read-only
D[5]
W5
read-only
D[4]
W4
read-only
D[3]
W3
read-only
D[2]
W2
read-only
D[1]
W1
read-only
D[0]
W0
read-only
Default value
0000 0000b = 00h (no events pending)
Serial address
A2h
Byte address
116 = 74h
The power-up default value is 00h. Following the first complete A/D conversion cycle, however, any of the bits may be set
depending upon the results.
Bit(s)
D[7]
W7
D[6]
W6
D[5]
W5
D[4]
W4
D[3]
W3
D[2]
W2
D[1]
W1
D[0]
W0
Function
High temperature warning, TEMP > THIGH
Low temperature warning, TEMP < TLOW
High voltage warning, VIN > VHIGH
Low voltage warning, VIN < VLOW
High laser diode bias warning, IBIAS > IHIGH
Low laser diode bias warning, IBIAS < ILOW
High transmit optical power warning,
TXOP > TXHIGH
Low transmit optical power warning,
TXOP < TXLOW
Operation
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
Warning Status Register 1 (WARN1)
D[7]
W15
read-only
D[6]
W14
read-only
D[5]
read-only
D[4]
read-only
D[3]
read-only
D[2]
read-only
D[1]
read-only
D[0]
read-only
Default Value
0000 0000b = 00h (no events pending)
Serial Address
A2h
Byte Address
117 = 75h
The power-up default value is 00h. Following the first complete A/D conversion cycle, however, either of the bits may be set
depending upon the results.
D[7]
D[6]
D[5:0]
Bit(s)
W15
W14
Function
Received power high warning, RXOP > RXHIGH
Received power low warning, RXOP < RXMIN
Reserved
Operation
1 = condition exists, 0 = normal/OK
1 = condition exists, 0 = normal/OK
Reserved, returns zero on reads
July 2010
51
M9999-072910-A
[e-mail] or [phone]