PL123E-09 Datasheet, PDF (7/10 Pages) Micrel Semiconductor – Low Skew Zero Delay Buffer

(Preliminary) PL123E-09
Low Skew Zero Delay Buffer
3.3V AND 2.5V AC ELECTRICAL SPECIFICATIONS (continued)
Description
Parameter Test Conditions
Min Typ Max Unit
3.3V, 66–100 MHz, <15 pF
–
–
75 ps
3.3V, >100 MHz, <15 pF
–
–
45 ps
3.3V, >66 MHz, <30 pF, Standard Drive –
– 100 ps
Period Jitter, Peak^[8,9]
T_PER
3.3V, >66 MHz, <30 pF, High Drive
–
–
70 ps
2.5V, >66 MHz, <15 pF, Standard. Drive –
–
60 ps
2.5V, 66–100 MHz, <15 pF, High Drive
–
–
60 ps
2.5V, >100 MHz, <15 pF, High Drive
–
–
45 ps
Notes:
7. For the given maximum loading conditions. See C L in Operating Conditions Table.
8. Parameter is guaranteed by design and characterization. Not 100% tested in production.
9. Typical jitter is measured at 3.3V or 2.5V, 29°C, with all outputs driven into the maximum spec ified load.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 12/13/11 Page 7