MLX90132 Datasheet, PDF (42/44 Pages) Melexis Microelectronic Systems – 13.56MHz RFID / NFC Transceiver

MLX90132
13.56MHz RFID / NFC Transceiver
14 ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
15 Standard information regarding manufacturability of Melexis
products with different soldering processes
Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity
level according to following test methods:
Reflow Soldering SMD’s (Surface MountDevices)
 IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface MountDevices
(classification reflow profiles according to table 5-2)
 EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface MountDevices Prior to Reliability Testing
(reflow profiles according to table 2)
Wave Soldering SMD’s (Surface MountDevices) and THD’s (Through Hole Devices)
 EN60749-20
Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat
 EIA/JEDEC JESD22-B106 and EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Iron Soldering THD’s (Through Hole Devices)
 EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Solderability SMD’s (Surface MountDevices) and THD’s (Through Hole Devices)
 EIA/JEDEC JESD22-B102 and EN60749-21
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak
temperature, temperature gradient, temperature profile etc) additional classification and qualification tests
have to be agreed upon with Melexis.
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
Melexis recommends reviewing on our web site the General Guidelines soldering recommendation
(http://www.melexis.com/Quality_soldering.aspx) as well as trim&form recommendations
(http://www.melexis.com/Assets/Trim-and-form-recommendations-5565.aspx).
Melexis is contributing to global environmental conservation by promoting lead free solutions. For more
information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of
the use of certain Hazardous Substances) please visit the quality page on our website:
http://www.melexis.com/quality.aspx
3901090132
Rev. 009
Page 42 of 44
Jan-2014