MDT10P74 Datasheet, PDF (9/24 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(19) T2STA R12
MDT10P74
Bit Symbol
1~0 T2CKPS1 0 0 = Prescaler is 1
~
0 1 = Prescaler is 4
T2CKPS0 1 x = Prescaler is 16
2 TMR2ON ^{0 TMR2 is off}
1 TMR2 is on
7~3
--
Unimplemented
(20) SCMBUF R13
Serial communication port buffer
(21) SCMCTL R14
Function
Bit Symbol
Function
3~0 SCM3 ^{0 0 0 0 SCM master mode , clock = Fosc/4}
~
0 0 0 1 SCM master mode , clock = Fosc/16
SCM0 ^{0 0 1 0 SCM master mode , clock = Fosc/64}
0 0 1 1 SCM master mode , clock = TMR2 output/2
0 1 0 0 SCM slave mode , clock = SCK pin , /SS control enable
0 1 0 1 SCM slave mode , clock = SCK pin , /SS control disable
4
CKS ^{0 Transmit happens on rising edge , receive on falling edge, Idle state for}
clock is low level.
1 Transmit happens on falling edge , receive on rising edge, Idle state for
clock is high level
5
SCMEN ^{0 disable SCM, then PC3, PC4, PC5 is I/O port.}
1 enable SCM
6 SCMROI ^{0 No overflow}
1 Overflow
7
WCOL ^{0 No collision}
1 The SCMBUF is written while it is still transmitting the previous word
(22) CCP1L R15
Capture/Compare/PWM LSB
(23) CCP1H R16
Capture/Compare/PWM MSB
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 9
(Preliminary)
2005/6 Ver. 1.5