MDT10P74 Datasheet, PDF (11/24 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P74
(28) CCP2L R1B
Capture/Compare/PWM LSB
(29) CCP2H R1C
Capture/Compare/PWM MSB
(30) CCP2CTL R1D
Bit Symbol
Function
3~0 CCP2M3 ^{0 0 0 0 CCP2 off}
~
0 1 0 0 Capture2 mode , every falling edge
CCP2M0 ^{0 1 0 1 Capture2 mode , every rising edge}
0 1 1 0 Capture2 mode , every 4^th rising edge
0 1 1 1 Capture2 mode , every 16^th rising edge
1 0 0 0 Compare2 mode , set output on match
1 0 0 1 Compare2 mode , clear output on match
1 0 1 0 Compare2 mode , generate software interrupt on match
1 0 1 1 Compare2 mode , trigger special event
1 1 x x PWM2 mode
5~4 PWM2LSB These bits are the two LSBs of the PWM2 duty cycle
7~6
--
Unimplemented
(31) ADRES R1E
A/D result register
(32) ADS0 R1F
Bit
Symbol
Function
0
ADRUN ^{0 A/D converter module is shut off and consumes no operating current}
1 A/D converter module is operating
1
--
Unimplemented
2 GO/DONEB ^{0 A/D conversion not in progress}
1 A/D conversion in progress
5~3
CHS2~0 ^{000 AIC0 001 AIC1 010 AIC2 011 AIC3 100 AIC4}
101 AIC5 110 AIC6 111 AIC7
7~6 ASCS1-0 ^{00 fosc/2 01 fosc/8 10 fosc/32 11 f RC (*Note)}
*Note determined by OSC mode, HF fosc/32 XT fosc/8 RC fosc/2 LF fosc/2
(33) TMR (Time Mode Register) R81
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 11
(Preliminary)
2005/6 Ver. 1.5