MDT10P74 Datasheet, PDF (7/24 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P74
Bit Symbol
Function
5
TIS
0 disable TMR0 interrupt
1 enable TMR0 interrupt
6
PEIE ^{0 disable all peripheral interrupt}
1 enable all peripheral interrupt
7
GIS
0 disable global interrupt
1 enable global interrupt
(13) PIFB1 (Peripheral Interrupt Flag Bit) R0C
Bit Symbol
Function
0
TMR1IF TMR1 interrupt flag
0 TMR1 did not overflow
1 TMR1 overflowed
1
TMR2IF TMR2 interrupt flag
0 No TMR2 to T2PER match occurred
1 TMR2 to T2PER match occurred
2
CCP1IF CCP1 interrupt flag
0 No TMR1 capture/compare occurred
1 A TMR1 capture/compare occurred
3
SCMIF SCM interrupt flag
0 Waiting SCM transmit/receive
1 The SCM transmission/reception is complete
4
TXIF USART transmit interrupt flag
0 The USART transmit buffer is full
1 The USART transmit buffer is empty
5
RCIF UASRT receive interrupt flag
0 The USART receive buffer is empty
1 The USART receive buffer is full
6
ADIF A/D interrupt flag
0 A/D conversion is not complete
1 A/D conversion completed
7
PCMIF PCM read/write interrupt flag
0 No read or write has occurred
1 A read or a write has occurred
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 7
(Preliminary)
2005/6 Ver. 1.5