MDT10P74 Datasheet, PDF (10/24 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(24) CCP1CTL R17
MDT10P74
Bit Symbol
Function
3~0 CCP1M3 ^{0 0 0 0 CCP1 off}
~
0 1 0 0 Capture1 mode , every falling edge
CCP1M0 ^{0 1 0 1}
0110
Capture1 mode , every rising edge
Capture1 mode , every 4^th rising edge
0 1 1 1 Capture1 mode , every 16^th rising edge
1 0 0 0 Compare1 mode , set output on match
1 0 0 1 Compare1 mode , clear output on match
1 0 1 0 Compare1 mode , generate software interrupt on match
1 0 1 1 Compare1 mode , trigger special event
1 1 x x PWM1 mode
5~4 PWM1LSB These bits are the two LSBs of the PWM1 duty cycle
7~6
--
Unimplemented
(25) RCSC R18
Bit Symbol
Function
0
RX9DF 9^th bit of received data
1
OERF ^{0 No overrun error}
1 Overrun error
2
FERF ^{0 No framing error}
1 Framing error
3
--
Unimplemented
4
CRENF ^{0 Disable continuous receive}
1 Enable continuous receive
5
SRENF ^{0 Disable single receive}
1 Enable single receive
6
RX9ENF ^{0 Select 8-bit reception}
1 Select 9-bit reception
7
SPENF ^{0 Serial port disable}
1 Serial port enable
(26) TXREG R19
USART transmit register
(27) RCREG R1A
USART receive register
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 10
(Preliminary)
2005/6 Ver. 1.5