MAX13171E Datasheet, PDF (9/38 Pages) Maxim Integrated Products – Multiprotocol, Pin-Selectable Data Interface Chipset

Multiprotocol, Pin-Selectable
Data Interface Chipset
MAX13175E ELECTRICAL CHARACTERISTICS (continued)
(V_CC = +3.135V to +5.5V, V_L = +1.62V to +5.5V, C1 = C2 = 1µF, C3 = C4 = C5 = 4.7µF, Figure 15, T_A = -40°C to +85°C, unless
otherwise noted. Typical values are at V_CC = +3.3V, V_L = +1.8V, T_A = +25°C.) (Note 2)
PARAMETER
Differential-Mode Impedance
V.11 Mode
Differential Path Enable Time
Differential Path Disable Time
Common-Mode Path Enable Time
Common-Mode Path Disable
Time
SYMBOL
CONDITIONS
-7V ≤ V_CM ≤ +7V, all channels, except no-
cable mode, Figure 12
-7V ≤ V_CM ≤ +7V, no cable, V_EE = 0V,
V_AB < 2V, Figure 12
MIN TYP MAX UNITS
100 104 110
Ω
115
50
µs
300
µs
12
µs
2
µs
High-Impedance Leakage
Current
I_Z
-15V ≤ V_{R_A} ≤ +15V
LOGIC INPUTS (M0, M1, M2, LATCH, DCE/DTE)
Input High Voltage
V_IH
Input Low Voltage
V_IL
Logic Input Current
I_IN
V_IN = GND or V_L
ESD PROTECTION
Human Body Model
R_A, R_B to GND
Air Gap Discharge IEC 61000-4-2
Contact Discharge IEC 61000-4-2
All Other Pins
Human Body Model
-50
+50
µA
0.66 x V_L
-1
V
0.33 x V_L V
+1
µA
±15
±10
kV
±6
±2
kV
Note 2: All devices are 100% production tested at T_A = +85°C for the MAX13171E/MAX13173E and T_A = +25°C for the
MAX13175E. Specifications over temperature are guaranteed by design.
Note 3: Guaranteed by design, not production tested.
Note 4: Output-to-output skews are evaluated as difference of propagation delays between different channels in the same condition
and for the same polarity (LH or HL).
Note 5: M[x] is the input bus DTE/DCE, M2, M1, M0.
_______________________________________________________________________________________ 9