Z86L88 Datasheet, PDF (8/80 Pages) Zilog, Inc. – INFRARED REMOTE CONTROLLERS

Z86L88
Low-Voltage IR Microcontroller
1
Features
Table 1 lists some of the features of the Z86L88 microcontroller.
Table 1. Z86L88 Features
Device ROM (KB) RAM* (Bytes)
Z86L88
16
237
Note: *General purpose
I/O Lines
23
Voltage Range
2.0 V to 3.6 V
• Low power consumption—40 mW (typical)
• Three standby modes
– STOP—2 A (typical)
– HALT—0.8 mA (typical)
– Low voltage
• Special architecture to automate both generation and reception of complex
pulses or signals:
– One programmable 8-bit counter/timer with two capture registers and two
load registers
– One programmable 16-bit counter/timer with one 16-bit capture register
pair and one 16-bit load register pair
– Programmable input glitch filter for pulse reception
• Five priority interrupts
– Three external
– Two assigned to counter/timers
• Low voltage protection
• Programmable watch-dog/power-on reset circuits
• Two independent comparators with programmable interrupt polarity
• Mask-selectable pull-up transistor on Ports 0, 2, and 3
• Programmable mask options:
– Oscillator selection: RC oscillator versus crystal or other clock source
19-4614; Rev 0; 4/09