|
Z86L88 Datasheet, PDF (16/80 Pages) Zilog, Inc. – INFRARED REMOTE CONTROLLERS | |||
|
◁ |
Z86L88
Low-Voltage IR Microcontroller
9
Table 6. DC Characteristics (Continued)
Symbol Parameter
ICC
Supply Current
TA = 0 °C to +70 °C
VCC Min
Max
Units Conditions
2.0 V
10
mA at 8.0 MHz
3.6 V
15
mA at 8.0 MHz
Notes
2, 3
2, 3
2.0 V
250
ïA at 32 kHz
2, 3, 8
3.6 V
850
ïA at 32 kHz
2, 3, 8
ICC1 Standby Current (HALT Mode) 2.0 V
3
mA VIN = 0 V, VCC at 2, 3
8.0 MHz
3.6 V
5
mA Same as above 2, 3
2.0 V
2
mA Clock Divide-by-16 2, 3
at 8.0 MHz
3.6 V
4
mA Same as above 2, 3
ICC2 Standby Current (STOP Mode) 2.0 V
8
ïA VIN = 0 V, VCC
4, 6, 9
WDT is not
Running
3.6 V
10
ïA Same as above 4, 6, 9
2.0 V
500
ïA VIN = 0 V, VCC
4, 6, 9
WDT is Running
3.6 V
800
ïA Same as above 4, 6, 9
TPOR Power-On Reset
2.0 V 12
75
ms
3.6 V 5
20
ms
VBO
VCC Low Voltage Protection
2.0
V 8 MHz max
5
Ext. CLK Freq.
Notes:
1. All outputs excluding P00, P01, P36, and P37
2. All outputs unloaded, inputs at rail
3. CL1 = CL2 = 100 pF
4. Same as note 2 except inputs at VCC
5. The VBO is measured at room temperature and typically is 1.6 V. VBO increases as the temperature decreases.
6. Oscillator stopped
7. Not applicable
8. 32-kHz clock driver input
9. WDT, Comparators, Low Voltage Detection, and ADC (if applicable) are disabled. The IC might draw more
current if any of the above peripherals is enabled.
19-4614; Rev 0; 4/09
|
▷ |