English
Language : 

MAX14820 Datasheet, PDF (7/29 Pages) Maxim Integrated Products – IO-Link Device Transceiver
◁
MAX14820
IO-Link Device Transceiver
AC ELECTRICAL CHARACTERISTICS (continued)
(VCC = 18V to 36V, VL = 2.3V to 5.5V, VGND = 0V; all logic inputs at VL or GND; TA = -40NC to +85NC, unless otherwise noted. Typical
values are at VCC = 24V, VL = 3.3V, and TA = +25NC, unless otherwise noted.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
SPI TIMING (CS, SCLK, SDI, SDO) (Figure 6)
SCLK Clock Period
tCH+CL
83.3
ns
SCLK Pulse-Width High
tCH
41.65
ns
SCLK Pulse-Width Low
CS Fall to SCLK Rise Time
SCLK Rise to CS Rise Hold Time
tCL
tCSS
tCSH
41.65
ns
20
ns
20
ns
SDI Hold Time
tDH
10
ns
SDI Setup Time
tDS
10
ns
Output Data Propagation Delay
tDO
32
ns
SDO Rise and Fall Times
Minimum CS Pulse
tFT
tCSW
20
ns
76.8
ns
Note 2: All devices are 100% production tested at TA = +25NC. Limits over the operating temperature range are guaranteed by
design.
Note 3: UV is an open-drain output. Connect UV to a voltage less than 5.5V through an external pullup resistor.
Note 4: Disable time measurements are load dependent.
����������������������������������������������������������������� Maxim Integrated Products  7
 ▷