DS8313 Datasheet, PDF (6/18 Pages) Maxim Integrated Products – Smart Card Interface

Smart Card Interface
RECOMMENDED DC OPERATING CONDITIONS (continued)
(V_DD = +3.3V, V_DDA = +5.0V, T_A = +25°C, unless otherwise noted. All specifications apply to both the DS8313 and DS8314, unless
otherwise noted in the CONDITIONS column.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Input Low Current
Input High Current
TIMING
I_{IL_PRES}
I_{IH_PRES}
V_{IL_PRES} = 0
V_{IH_PRES} = V_DD
5
μA
10
μA
Activation Time
Deactivation Time
CLK to Card Start
Time
Window Start
Window End
PRES Debounce Time
t_ACT
t_DEACT
t₃
t₅
t_DEBOUNCE
50
220
μs
50
80 100
μs
50
130
μs
140
220
5
8
11
ms
Note 1: Operation guaranteed at -40°C and +85°C but not tested.
Note 2: I_{DD_IC} measures the amount of current used by the DS8313 to provide the smart card current minus the load.
Note 3: Stop mode is enabled by setting CMDVCC, 5V/3V, and 1_8V to a logic-high.
Note 4: Parameters are guaranteed to meet all ISO 7816, GSM11-11, and EMV 2000 requirements. For the 1.8V card, the maximum
rise and fall time is 10ns.
Note 5: Parameter is guaranteed to meet all ISO 7816, GSM11-11, and EMV 2000 requirements. For the 1.8V card, the minimum
slew rate is 0.05V/µs and the maximum slew rate is 0.5V/µs.
6 _______________________________________________________________________________________