MAX15096 Datasheet, PDF (3/15 Pages) Maxim Integrated Products – Integrated Hot-Swap/Electronic

MAX15096/MAX15096A/
MAX15096D
2.7V to 18V, 6A Integrated Hot-Swap/
Electronic Circuit Breaker
Electrical Characteristics (continued)
(V_IN = V_CC = 2.7V to 18V, T_A = T_J = -40°C to +105°C, unless otherwise noted. Typical values are at V_IN = 12V, R_CB = 10.5kΩ, and
T_A = +25°C.) (Note 2)
PARAMETER
Slow-Comparator Response Time
(Note 5)
CB Source Current
Maximum Current Limit During
Startup
Fast-Comparator Threshold
Fast-Comparator Response Time
Additional Delay Time by TIMER
Minimum CB Voltage Reference
During Foldback (Note 6)
Maximum CB Voltage Reference
During Foldback (Note 6)
TIMING
Startup Maximum Time Duration
Autoretry Delay Time
Output Short Detection at Startup
MOSFET
Total On-Resistance
GATE Charge Current
OUTPUTS
PG Output Low Voltage
PG Output High-Leakage Current
DISCHARGE
Discharge Current After PG
Deasserted
PG THRESHOLD
PG Threshold
PG Assertion Delay
OUT-to-IN Short-Circuit Detection
Threshold
OUT Preload Threshold
SYMBOL
t_SCD
I_{THCB_NORM}
CONDITIONS
0.6% overcurrent
30% overcurrent
In power-on mode
I_LIM
(see Figure 2)
I_{FC_TH}
t_FCD
t_AFCD
V_{THCB_MIN}
R_TIMER = open
V_IN - V_OUT > 10V, R_CB = 41.2kΩ
V_{THCB_MAX} V_IN - V_OUT < 2V, R_CB = 41.2kΩ
t_SU
t_RESTART
t_SHORT
MAX15096A/MAX15096D only
R_ON
I_GATE
T_A = +25°C
T_A = -40°C to +105°C
V_OL
Low-impedance state, I_PG = +5mA
I_OH
High-impedance state, V_PG = 16V
I_DISCHARGE
V_OUT < 7.1V (MAX15096D only)
V_OUT ≥ 7.1V to 18V
(MAX15096D only)
V_PG
t_PG
V_IOSHT
V_PL
V_IN = 12V
From V_OUT > V_PG and
V_GATE - V_OUT > 3V
Measured at V_OUT
Measured at V_OUT
MIN TYP MAX UNITS
2.7
ms
200
µs
12
µA
0.5 x
I_{CB_TH}
A
1.5 x
I_{CB_TH}
A
200
ns
2
µs
60
mV
250
mV
43
52
61
ms
3.4
s
10.4 13.2 15.6
ms
12
18
mΩ
25
4.8
5.9
7.1
μA
0.4
V
1
μA
50
100 160
710mW/
mA
V_OUT
0.9 x
V_IN
V
12
16
20
ms
0.9 x
V_IN
V
0.5 x
V_IN
V
www.maximintegrated.com
Maxim Integrated │  3