MAX15096 Datasheet, PDF (2/15 Pages) Maxim Integrated Products – Integrated Hot-Swap/Electronic

MAX15096/MAX15096A/
MAX15096D
2.7V to 18V, 6A Integrated Hot-Swap/
Electronic Circuit Breaker
Absolute Maximum Ratings
V_CC to GND.............................................................-0.3V to 20V
IN to GND...............................................................-0.3V to +20V
PG, PRSNT to GND...............................................-0.3V to +20V
OUT to GND................................................-0.3V to (V_IN + 0.3V)
GATE to OUT...........................................................-0.3V to +6V
EN, UVOV to GND...................................................-0.3V to +6V
TIMER, CB to GND.................................-0.3V to (V_REG + 0.3V)
REG to GND.............................-0.3V to min (+6V, (V_CC + 0.3V))
Continuous Power Dissipation (T_A = +70°C)
16-bump WLP (derate 20.4mW/°C above +70°C).....1633mW
Operating Temperature Range.......................... -40°C to +105°C
Junction Temperature...................................................... +150°C
Storage Temperature Range............................. -60°C to +150°C
Lead Temperature (soldering, 10s)................................. +300°C
Soldering Temperature (reflow)....................................... +260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Package Thermal Characteristics _{(Note 1)}
Junction-to-Ambient Thermal Resistance (θ_JA)....................49°C/W
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer
board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
Electrical Characteristics
(V_IN = V_CC = 2.7V to 18V, T_A = T_J = -40°C to +105°C, unless otherwise noted. Typical values are at V_IN = 12V, R_CB = 10.5kΩ, and
T_A = +25°C.) (Note 2)
PARAMETER
POWER SUPPLIES
V_CC Operating Range
IN Operating Range
V_CC Supply Current
IN Supply Current
V_CC Default Undervoltage Lockout
V_CC Default Undervoltage-Lockout
Hysteresis
REG Regulator Voltage
UV Turn-On Threshold
UV Turn-On Threshold Hysteresis
OV Turn-On Threshold
OV Turn-On Threshold Hysteresis
UVOV Input Leakage Current
CURRENT LIMIT
Circuit-Breaker Accuracy (Note 3)
Circuit-Breaker Accuracy Deviation
(Note 4)
SYMBOL
CONDITIONS
MIN
V_CC
V_IN
I_CC
I_IN
V_UVLO
V_IN = V_CC = 2.7V to 18V, enable
V_IN = V_CC = 2.7V to 18V, disable
R_CB = 41.2kΩ, no load
R_CB = 10.5kΩ, no load
V_CC rising
V_{UVLO_HYS}
V_REG
V_{UV_TH}
V_{UV_HYS}
V_{OV_TH}
V_{OV_HYS}
I_LEAK
No load, V_CC > 4V
V_UVOV rising
V_UVOV falling
V_UVOV rising
V_UVOV falling
V_UVOV = 0 to 5.5V
2.7
2.7
2.35
3
0.536
1.199
-1
I_{CB_TH}
V_IN = 12V
R_CB = 41.2kΩ
R_CB = 10.5kΩ
5.4
1.14
R_CB = 10.5kΩ to 21.5kΩ, compared to
nominal current-limit value, V_IN = V_CC -10
= 8V to 15V
R_CB = 21.5kΩ to 41.2kΩ, compared to
nominal current-limit value
-10
TYP
0.58
0.59
3.3
1.3
2.5
0.1
3.3
0.55
50
1.23
50
6
1.27
MAX UNITS
18
V
18
V
0.9
mA
mA
3.8
mA
1.8
2.65
V
V
3.6
V
0.564
V
mV
1.261
V
mV
+1
µA
6.6
A
1.40
+10
%
+10
www.maximintegrated.com
Maxim Integrated │  2