MAX109 Datasheet, PDF (3/29 Pages) Maxim Integrated Products – 8-Bit, 2.2Gsps ADC with Track/Hold Amplifier and 1:4 Demultiplexed LVDS Outputs

8-Bit, 2.2Gsps ADC with Track/Hold Amplifier
and 1:4 Demultiplexed LVDS Outputs
ABSOLUTE MAXIMUM RATINGS
V_CCA to GNDA ....................................................... -0.3V to +6V
V_CCD to GNDD ....................................................... -0.3V to +6V
V_CCI to GNDI ........................................................... -0.3V to +6V
V_CCO to GNDO ................................................... -0.3V to +3.9V
V_EE to GNDI ............................................................ -6V to +0.3V
Between Grounds (GNDA, GNDI, GNDO,
GNDD, GNDR) ................................................ -0.3V to +0.3V
V_CCA to V_CCD ..................................................... -0.3V to +0.3V
V_CCA to V_CCI ....................................................... -0.3V to +0.3V
Differential Voltage between INP and INN ........................... ±1V
INP, INN to GNDI ................................................................. ±1V
Differential Voltage between CLKP and CLKN..................... ±3V
CLKP, CLKN, CLKCOM to GNDI ............................... -3V to +1V
Digital LVDS Outputs to GNDO .............. -0.3V to (V_CCO - 0.3V)
REFIN, REFOUT to GNDR ........................-0.3V to (V_CCI + 0.3V)
REFOUT Current ...............................................-100µA to +5mA
RSTINP, RSTINN to GNDA .....................-0.3V to (V_CCO + 0.3V)
RSTOUTP, RSTOUTN to GNDO .............-0.3V to (V_CCO + 0.3V)
VOSADJ, SAMPADJ,
TEMPMON to GNDI...............................-0.3V to (V_CCI + 0.3V)
PRN, DDR, QDR to GNDD.......................-0.3V to (V_CCD + 0.3V)
DELGATE0, DELGATE1 to GNDA ...........-0.3V to (V_CCA + 0.3V)
Continuous Power Dissipation (T_A = +70°C)
256-Ball SBGA (derate 74.1mW/°C above +70°C for
a multilayer board) ................................................. 5925.9mW
Operating Temperature Range
MAX109EHF ...................................................-40°C to +85°C
Thermal Resistance θ_JA (Note 1) .......................................3°C/W
Operating Junction Temperature.....................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Note 1: Thermal resistance is based on a 5in x 5in multilayer board. The data sheet assumes a thermal environment of 3°C/W.
Thermal resistance may be different depending on airflow and heatsink cooling capabilities.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(V_CCA = V_CCI = V_CCD = 5V, V_CCO = 3.3V, V_EE = -5V, GNDA = GNDI = GNDO = GNDD = GNDR = 0V, VOSADJ = SAMPADJ =
open, digital output pins differential R_L = 100Ω. Specifications ≥ +25°C guaranteed by production test, < +25°C guaranteed by
design and characterization. Typical values are at T_A = +25°C, unless otherwise noted.)
PARAMETER
DC ACCURACY
Resolution
Integral Nonlinearity (Note 2)
Differential Nonlinearity (Note 2)
Transfer Curve Offset (Note 2)
ANALOG INPUTS (INN, INP)
SYMBOL
CONDITIONS
RES
INL
DNL
V_OS
(Note 8)
Guaranteed no missing codes, T_A = +25°C
(Note 8)
VOSADJ control input open (Note 8)
MIN TYP MAX UNITS
8
Bits
-0.8 ±0.25 +0.8 LSB
-0.8 ±0.25 +0.8 LSB
-5.5
0
+5.5 LSB
Common-Mode Input-Voltage
Range
V_CM Signal and offset with respect to GNDI
±1
V
Common-Mode Rejection Ratio
(Note 3)
CMRR
50
dB
Full-Scale Input Range (Note 2)
Input Resistance
Input Resistance Temperature
Coefficient
V_FS
R_IN
TC_R
V_REFIN = 2.5V
470
500
535 mV_P-P
45
50
55
Ω
150
ppm/°C
VOS ADJUST CONTROL INPUT (VOSADJ)
Input Resistance (Note 4)
R_VOSADJ
Input Offset Voltage
VOSADJ = 0V
V_OS
VOSADJ = 2.5V
SAMPLE ADJUST CONTROL INPUT (SAMPADJ)
Input Resistance
R_SAMPADJ
Aperture Time Adjust Range
t_AD
SAMPADJ = 0 to 2.5V
25
50
75
kΩ
-20
mV
20
mV
25
50
75
kΩ
30
ps
_______________________________________________________________________________________ 3