English
Language : 

MAX1332 Datasheet, PDF (2/25 Pages) Maxim Integrated Products – 3Msps/2Msps, 5V/3V, 2-Channel, True-Differential 12-Bit ADCs
3Msps/2Msps, 5V/3V, 2-Channel, True-
Differential 12-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND (MAX1332) ......................................-0.3V to +6V
AVDD to AGND (MAX1333) ......................................-0.3V to +4V
DVDD to DGND.........................................................-0.3V to +4V
AGND to DGND.....................................................-0.3V to +0.3V
SCLK, CNVST, SHDN, CHSEL, BIP/UNI,
DOUT to DGND ...................................-0.3V to (DVDD + 0.3V)
AIN0P, AIN0N, AIN1P, AIN1N, REF to
AGND...................................................-0.3V to (AVDD + 0.3V)
Maximum Current into Any Pin .........................................±50mA
Continuous Power Dissipation (TA = +70°C)
16-Pin TQFN (derate 17.5mW/°C above +70°C) ....1398.6mW
Operating Temperature Range
MAX133_ETE ...................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS (MAX1332)
(AVDD = +4.75V to +5.25V, DVDD = +2.7V to +3.6V, fSCLK = 48MHz, VREF = 4.096V, TA = TMIN to TMAX, unless otherwise noted.
Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
DC ACCURACY (BIP/UNI = DGND) (Note 1)
Resolution
N
Integral Nonlinearity
INL
Differential Nonlinearity
DNL
Offset Error
Gain Error
CONDITIONS
MIN TYP MAX UNITS
12
Bits
±0.6 ±1.0 LSB
±0.6 ±1.0 LSB
±0.9 ±3.0 LSB
±0.6 ±6.0 LSB
Offset-Error Temperature
Coefficient
±0.2
ppm/°C
Gain-Error Temperature
Coefficient
±1.1
DYNAMIC SPECIFICATIONS (AIN = -0.2dBFS, fIN = 525kHz, BIP/UNI = DVDD, unless otherwise noted) (Note 1)
Signal-to-Noise Ratio
SNR
70
71.5
Signal-to-Noise Plus Distortion
SINAD
70
71.4
Total Harmonic Distortion
THD
-93
-84
Spurious-Free Dynamic Range
SFDR
84
93
Channel-to-Channel Isolation
76
Full-Linear Bandwidth
SINAD > 68dB
2
Full-Power Bandwidth
6
Small-Signal Bandwidth
6
CONVERSION RATE
Minimum Conversion Time
Maximum Throughput Rate
tCONV Figure 5
271
3
ppm/°C
dB
dB
dBc
dBc
dB
MHz
MHz
MHz
ns
Msps
Minimum Track-and-Hold
Acquisition Time
tACQ Figure 5
52
ns
2 _______________________________________________________________________________________