5-1437567-8 Datasheet, PDF (244/326 Pages) Tyco Electronics – DIP Switch Part Number Index

PICOD Series
Pushwheel Switches, Subminiature, Panel Mount, Dual Button
The PICOD family offers small panel-mounted pushwheel code
switches, ideally suited for high density applications. They are used
for the controlling and programming of frequency synthesizers,
counters and timers, data comparators, security encoders, weighing
machines, etc. The dependable pushbutton action allows narrow
0.3 inch width on panel. Changes to higher or lower settings are
accomplished rapidly by successive operation of the appropriate
buttons. The featherweight PICOD is less than 0.6 inch high, yet
rugged enough for hand-held and portable instruments that may be
subjected to field abuse. Heavy gold plating on wiping contacts
affords low contact resistance for reliable operation over long
periods of service. Easy-to-read characters are viewed through
dust-sealed window. Installation costs are minimized by snap-
together design – no inconvenient hardware.
MATERIAL SPECIFICATIONS:
Fixed Contacts ..................................1 microns AU over Ni over Cu
Moving Contacts................................Gold-clad Ni over copper alloy
PC Board............................................FR4 Glass epoxy
Molded Parts ......................................Noryl-SE1, Black matte finish
Window..............................................Thermoplastic resin
TYPICAL PERFORMANCE CHARACTERISTICS:
Contact Rating ..................................0.4 VA @ 20 VDC max.
Contact Circuit Resistance ................0.15 Ohm max.
Operating Force ................................Approx. 11 oz.
PC Terminal Spacing ........................0.100"
Character Height/Color.......................122" White (.094" for hex codes)
Life Expectancy ................................More than 105 operations
Operating temperature ......................-10° C to + 60° C
PICOD - 131 - AK
Codes
111 = Decimal
131 = BCD
137 = BCD Complement
301 = Hexadecimal
307 = Hexa. Complement
400 = Switch-over
Connections
AK = pcb short
AL = pcb long
LS = solder pin
AL/D = pcb long, interrupted
ALU = pcb long downward
See Code Tables on Page J3
PICOD111AL
ACCESSORIES
Front Mount
Wheel
J
Snap Detent
Description
Marks
PICOA
PICOADP
PICOBG
PICOP
B5LS
B5L
Spacer, 0.1" wide
Spacer, 0.1" wide, with decimal point
Spacer, 0.3" wide (same size as switch)
End-plate pair
5 pin connector with PC pins for AK types
5 pin connector with wire lug termination for AK types
Catalog 1308390
Issued 9-04
www.tycoelectronics.com
Dimensions are in inches
Dimensions are shown for
and millimeters unless otherwise reference purposes only.
specified. Values in parentheses Specifications subject
or brackets are metric equivalents. to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
J7
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967