5-1437567-8 Datasheet, PDF (243/326 Pages) Tyco Electronics – DIP Switch Part Number Index

SH6 Series
Pushwheel Switches, Subminiature, Panel Mount, Dual Button
SH6 Series pushwheel switches are the smallest panel mounted
dual pushbutton code switches available. They have a snap-action
detent with an audible click. The dual-purpose finger terminals
may be used for direct mounting on printed circuit boards, or wire
may be soldered directly to the gold-plated conductors. The SH6 is
designed for several means of panel mounting: groups of any
number of switches may be snapped into panel holes of proper size
and retained by the integral clips (front mounting), or groups may
be held in place in a panel hole by being supported from rear when
the switches are PC mounted. These reliable switches are made to
the same exacting requirements as the SMCD, PICOD and DPS
Series.
MATERIAL SPECIFICATIONS
Moving Contacts................................Gold-clad Ni over copper alloy
Fixed Contacts ..................................AU over Ni
PC Board............................................FR4 Glass Epoxy
Molded Parts ......................................Noryl-SE1, black matte finish
Window..............................................Thermoplastic resin
TYPICAL PERFORMANCE CHARACTERISTICS
Contact Rating ..................................0.4 VA @ 20 VDC (max.)
Contact Circuit Resistance ................0.12 ohm max.
PERFORMANCE CHARACTERISTICS
Operating Force ................................Approx. 11 oz.
PC Terminal Spacing ........................0.100"
Character Height/Color......................0.118" White
Life Expectancy ................................More than 105 operations
Operating Temperature ....................-20°C to +80°C
SH6 SERIES
FRONT MOUNTING
(See note below)
.039-.067
(1.0 -1.70)
REAR MOUNTING
.039
(1.0)
REAR MOUNTING
.
SH6131AK
SH6 - 131 - AK
Codes
131 = BCD
137 = BCD Complement
See Code Tables on Page J3
Connections
AK = pcb short
AL = pcb long
LS = solder pin
.059
(1.50)
.787
(20.0)
.677
(17.2)
J
.031
(.787)
4 EQ. SP.
@ .100
(2.54)
.551
(14.0)
.551
(14.0)
n x .236
(n x 6.0)
n x .236
(n x 6.0)
n x .236
n
(n x 6.0)
n = Number of switches
.551 .591
(14.0) (15.0)
.059
(1.5)
.110
(2.8)
.020
(.508)
.240
(6.1)
4 eq. sp.
@ .100 (2.54)
.551
(14.0)
-AK-
.236
(5.99)
131 1 2 4 8 C
137 2 8 C 1 4
.020
(0.50)
.024
(0.60)
.535
(13.6) ^A
.551
(14.0)
Note: Remove locating lugs from side of last switch to enable mounting from the front panel.
J6
Catalog 1308390
Issued 9-04
www.tycoelectronics.com
Dimensions are in inches
Dimensions are shown for
and millimeters unless otherwise reference purposes only.
specified. Values in parentheses Specifications subject
or brackets are metric equivalents. to change.
.236–0.02
(6.0–0.5)
-AL-
4x
.100
(2.54)
-
-LS-
Note: Use Card Edge Connector B5LS or B5L with AK type.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967