5-1437567-8 Datasheet, PDF (23/326 Pages) Tyco Electronics – DIP Switch Part Number Index

DRD "E" Series
Rotary Dip Switches, Process Sealed, Through Hole and Surface Mount
A
MATERIAL SPECIFICATIONS:
TYPICAL PERFORMANCE CHARACTERISTICS:
Contacts ..................................Gold flashed copper alloy
Contact Rating ........................0.4 VA @ 20 VDC max.
Terminals ................................Tin lead plated brass
Initial Contact Resistance ........50 Milliohms max. @ 2 VDC
Base, Rotor, Case ....................PC, Glass filled PBT resin (blue case)
SMT, Polymide (white case)
Insulation Resistance ..............1,000 Megohms min. @100 VDC
Dielectric Strength ..................300 VAC RMS @ sea level
Movable Contact......................Gold flashed copper alloy
Operating Force ......................6 Oz.-in. nom.
Ball Support Plate....................Copper alloy
SMT Operating Force..............3 Oz.-in. nom.
Detent Spring ..........................Stainless steel (spring)
Life Expectancy ......................20,000 Steps
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature............-22ºF to +185ºF (-30°C to +85°C)
Storage Temperature................-49ºF to 212ºF (-45°C to +100°C)
Vibration Resistance................Subjected to vibration of 10-55hz per
second with a total amplitude of .06 in. in 3
mutually perpendicular directions for 2
hours each
Shock Resistance ....................Will withstand 50G acceleration in 3
different planes for a period of 11
milliseconds
Salt Spray Test ........................Withstands an atmosphere of 5% salt water
at temperature of 50°C
Hydrogen Sulfide Test ............Withstands an atmosphere of 15-20 PPM
hydrogen sulfide gas at temperature of
40°C for 240 hours
Atmospheric Test ....................Withstands an atmosphere of 30-50 PPM
sulfite gas at a temperature of 40°C for 240
hours
Solder Heat Resistance ............Withstands 5 sec. flow solder bath of
260°C when mounted on a .06" thick PC
board per MIL-STD 202, Method 210
Bubble Test..............................Withstands submersion in 60°C Flouriert
for 1 min. without leakage
DRD10E
DRD16CE
TRUTH TABLES
Terminal Identification
(view from bottom of the switch)
81
CC
24
VIEW FROM BOTTOM
OF THE SWITCH
81
CC
24
NOTE: COMMON TERMINALS ARE CONNECTED INTERNALLY.
ACTUATOR
LOCATION
10-Position, BCD (red actuator)
Pos. 0 1 2 3 4 5 6 7 8 9
C XXXXXXXXXX
1
X
X
X
X
X
2
XX
XX
4
XXXX
8
XX
16-Position, Hexadecimal (black actuator)
Pos. 0 1 2 3 4 5 6 7 8 9 A B C D E F
C XXXXXXXXXXXXXXXX
1
X
X
X
X
X
X
X
X
2
XX
XX
XX
XX
4
XXXX
XXXX
8
XXXXXXXX
10-Position, BCD Complement (orange actuator)
Pos. 0 1 2 3 4 5 6 7 8 9
C XXXXXXXXXX
1X
X
X
X
X
2 XX
XX
XX
4 XXXX
XX
8 XXXXXXXX
16-Position Hexadecimal Complement (white actuator)
Pos. 0 1 2 3 4 5 6 7 8 9 A B C D E F
C XXXXXXXXXXXXXXXX
1X
X
X
X
X
X
X
X
2 XX
XX
XX
XX
4 XXXX
XXXX
8 XXXXXXXX
Catalog 1308390
Issued 9-04
www.tycoelectronics.com
Dimensions are in inches
Dimensions are shown for
and millimeters unless otherwise reference purposes only.
specified. Values in parentheses Specifications subject
or brackets are metric equivalents. to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
A23
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967