5-1437567-8 Datasheet, PDF (10/326 Pages) Tyco Electronics – DIP Switch Part Number Index

AR Series
Hybrid DIP Switches, Through Hole and Surface Mount
A
AUTO-INSERTABLE* DIP SWITCH
WITH INTEGRAL RESISTORS
* Flush actuator versions are auto-insertable
SEE PAGE A7 FOR PRODUCT SPECIFICATIONS
FEATURES:
All the features of the AD SERIES - PLUS
• Thick film pull-up resistors molded into the base of the switch.
• Replaces discrete resistor network plus DIP Switch with one component.
• Available with 3.3K ohms or 10K ohms resistors.
• Ceramic substrate allows wave soldering temperatures of 245°C for up to 30
seconds per MIL-STD 202, Method 210.
• Custom resistor values available.
• Shipped in off position.
Rated Pwr.
125 mW
125 mW
Resistance
3.3K Ohms (red)
10K Ohms (green)
Tolerance
±5% at 85°C
±5% at 85°C
Max. Voltage
24V
24V
RESISTOR NETWORK INFORMATION
PIN 16
PIN 9
PIN 1
PIN 8
RESISTOR
COMMON
AR
HOW TO
ORDER
Actuator Style
E = Extended
F = Flush Auto-Insertable
P = Piano (On Down)
PA = Piano (On Up)
See Pages A7-A9 for
dimensional info.
Resistor Value
3.3K Ohms (Red case)
10K Ohms (Green case)
Custom values are available on special order
Series
Auto-Dip with Resistors
No. of Positions
02, 04, 06, 08, 10
Terminations
Blank = PC
S = Outside '“L” (SMT)
SA - Inside “L” (SMT)
Seal Type
Blank = No seal
T = Tape (flush actuator only)
See Page A9
for board layout.
Example: ARF 06 10KST = Auto-Dip
Flush actuator
06 positions
10K ohms resistors
Outside “L” terminations & tape seal
A10
Catalog 1308390
Issued 9-04
www.tycoelectronics.com
Dimensions are in inches
Dimensions are shown for
and millimeters unless otherwise reference purposes only.
specified. Values in parentheses Specifications subject
or brackets are metric equivalents. to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967