M02006 Datasheet, PDF (7/16 Pages) M/A-COM Technology Solutions, Inc. – CMOS Pre-amplifier with AGC for Long-reach 155 Mbps Fiber-optics Based Transmitter

M02006
CMOS Pre-amplifier with AGC for Long-reach
155 Mbps Fiber-optics Based Transmitter
Rev V4
3.0 Functional Description
3.1
Overview
The M02006 is a low-noise, transimpedance amplifier with AGC, manufactured in sub-micron CMOS. Its wide
dynamic range, differential output and high PIN bias make it well suited for telecommunications, especially OC-3/
STM-1. However, the M02006 is intended to meet the needs of both Telecom and Datacom users.
The M02006 is available only in die form. For optimum system performance, die should be mounted in close
proximity with the photodetector.
The M02006 is designed to be used with the MC2045 postamplifier IC. When combined with a photodiode, the chip
set forms a high performance, low cost 5 V receiver.
Figure 3-1. Functional Block Diagram
PIN K
Series Pass
Regulator
Bandgap
1.234v
R
PIN A
TZA
Reference
Generator
AGC Control
+1
D_OUT
+1
D_OUT
+1
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support