M02006 Datasheet, PDF (4/16 Pages) M/A-COM Technology Solutions, Inc. – CMOS Pre-amplifier with AGC for Long-reach 155 Mbps Fiber-optics Based Transmitter

M02006
CMOS Pre-amplifier with AGC for Long-reach
155 Mbps Fiber-optics Based Transmitter
1.3
AC Characteristics
Table 1-3. AC Characteristics
Symbol
Parameter
Min.
R_OUT
Output impedance (single ended)
-
I_NOISE
Input noise current ^{(1), (2)}
-
PIN(mean), Min. Optical sensitivity ^{(1), (2)}
-40
I_MAX
Input overload current
2.2
PIN(mean), Max. Optical saturation ⁽²⁾
-
G
Small signal transimpedance ^{(3), (4), (5)}
Single ended:
-
Differential:
-
V_D
Differential output voltage ⁽³⁾
-
BW
Bandwidth to -3 dB point (electrical)
100
T_rT_f
Data out rise/fall times (20% - 80% points)
-
T_PWD
Pulse width distortion
-
OS_PULSE
Pulse overshoot
-
T_AGC
AGC setting time
-
OS_AGC
AGC overshoot
-
PSRR
Power supply rejection ratio (<4 MHz)
40
NOTES:
1. Measured with input capacitance, C_IN = 0.7 pF to 1.0 pF
2. Assuming photodiode response of 0.9 A/W, extinction ratio of 10 dB and BER of 10^-10
3. The 2006 is designed to drive a load >500 Ω. Measurements are taken into high Z
4. Measured at 10 MHz
5. Measured at input current = 2μA_PP
Rev V4
Typ.
Max.
Units
50
-
Ω
7.5
12
nA_rms
-
-37
dBm
4.5
-
mA_PP
+3
-
dBm
kΩ
-
130
-
260
-
800
mV
-
-
MHz
-
2
ns
-
1
%
-
3
%
-
100
µs
-
12
%
-
-
dB
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support