M02006 Datasheet, PDF (6/16 Pages) M/A-COM Technology Solutions, Inc. – CMOS Pre-amplifier with AGC for Long-reach 155 Mbps Fiber-optics Based Transmitter

M02006
CMOS Pre-amplifier with AGC for Long-reach
155 Mbps Fiber-optics Based Transmitter
Rev V4
2.0 Pin Description
2.1
Pin Descriptions
Table 2-1. Pin Descriptions
Die Pad No
Name
Function
1, 8
GND
Ground pin. Connect to the most negative supply, Both pins should be used
2
D_OUT
Non-inverted data output. Differential output with D_OUT (goes high as light increases)
3, 6
V_CC
Power pin. Connect to most positive supply. Either or both pins may be used
4
PINK
PIN cathode connection. Connect between this pin and PINA. Connect a decoupling capacitor to ground
5
PINA
PIN anode connection. Connect between this pin and PINK
7
D_OUT
Inverted data output. Differential output with D_OUT
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support