M02006 Datasheet, PDF (11/16 Pages) M/A-COM Technology Solutions, Inc. – CMOS Pre-amplifier with AGC for Long-reach 155 Mbps Fiber-optics Based Transmitter

M02006
CMOS Pre-amplifier with AGC for Long-reach
155 Mbps Fiber-optics Based Transmitter
Rev V4
4.3
Layout Considerations
Use good high-frequency design and layout techniques, taking care to bypass V_CC over the frequencies to several
hundred MHz. When using die, take care to minimise bond-wire length, especially for the PIN A and Gnd pads. A
typical TO-can assembly is shown in Figure 4-3.
Figure 4-3. Typical TO-can Assembly
D_OUT
D_OUT
470pF
Gnd
V_CC
11
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support