English
Language : 

LTC3646-1_15 Datasheet, PDF (1/28 Pages) Linear Technology – 40V, 1A Synchronous Step-Down Converter
FEATURES
n Wide Input Voltage Range: 4.0V to 40V
n 1A Guaranteed Output Current
n High Efficiency: Up to 95%
n Wide Output Voltage Range
LTC3646: 2.0V to 30V
LTC3646-1: 0.6V to 15V
n ±1% Accurate Reference Voltage
n Internal or External Compensation
n Switching Frequency Adjustable and Synchronizable:
200kHz to 3MHz
n Selectable High Efficiency Burst Mode® Operation or
Forced Continuous Mode
n 14 Lead 3mm × 4mm DFN or Thermally Enhanced
16-Lead MSOP Packages
APPLICATIONS
n Point of Load Power Supplies
n Intermediate Bus Power
n Automotive Applications
LTC3646/LTC3646-1
40V, 1A Synchronous
Step-Down Converter
DESCRIPTION
The LTC®3646 is a high efficiency, step-down DC/DC
converter with internal high side and synchronous power
FETs. It draws only 140µA typical DC supply current in
Burst Mode operation at no load while maintaining output
voltage regulation.
The LTC3646 can supply up to a 1A load, and its combina-
tion of Burst Mode operation, integrated power switches
and low quiescent current provides high efficiency over a
broad range of load currents. Alternatively, it can be used
in forced continuous mode for ripple sensitive applications.
The LTC3646 has a wide 4.0V to 40V input range and its
patented controlled on-time architecture and 0.6V refer-
ence voltage allow for large step-down ratios without
the risk of output overvoltage. The frequency may be set
between 200kHz and 3.0MHz with a program resistor or
synchronized to an external clock.
The internal soft-start, short-circuit protection and volt-
age rating make the LTC3646 a robust part ideal for high
voltage applications.
L, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks
and Hot Swap is a trademark of Linear Technology Corporation. All other trademarks are the
property of their respective owners. Protected by U.S. Patents, including 6580258, 5481178,
5994885, 6304066, 5847554, 6476589, 6774611.
TYPICAL APPLICATION
VIN
40V MAX
10µF
4.7µF
PVIN
BOOST
SVIN
RUN
LTC3646
INTVCC
SW
MODE/SYNC
ITH
RT
SWITCH VON
EXTVCC CONTROL
+–
0.6V
VFB
SGND
PGND
0.1µF
3.3µH
VOUT
5V
1A
412k
15µF
56.2k
3646 TA01a
Efficiency Curve
100 VIN = 12V
90 f = 1MHz
80
VOUT = 5V
1.0
VOUT = 3.3V 0.8
70
60
0.6
50
40
0.4
30
VOUT = 5V
20
VOUT = 3.3V
0.2
10
0
0
0.001
0.01
0.1
1
LOAD CURRENT (A)
3646 TA01b
For more information www.linear.com/LTC3646
36461fb
1