English
Language : 

PDT006A0X3-SRZ Datasheet, PDF (1/39 Pages) Lineage Power Corporation – 6A Digital Pico DLynxTM: Non-Isolated DC-DC Power Modules 3Vdc ––14.4Vdc input; 0.45Vdc to 5.5Vdc output; 6A Output Current
Preliminary Data Sheet
October 17, 2011
6A Digital Pico DLynxTM: Non-Isolated DC-DC Power Modules
3Vdc ––14.4Vdc input; 0.45Vdc to 5.5Vdc output; 6A Output Current
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (Z
versions)
ƒ Compatible in a Pb-free or SnPb reflow
environment (Z versions)
ƒ DOSA based
ƒ Wide Input voltage range (3Vdc-14.4Vdc)
RoHS Compliant
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Industrial equipment
Vin+
Cin
GND
VIN
PGOOD
VOUT
VS+
MODULE
SEQ
CLK
TRIM
DATA
SMBALRT# ADDR0
ADDR1
ON/OFF
SIG_GND
SYNC GND VS-
RTUNE
CTUNE
RTrim
RADDR1 RADDR0
Vout+
Co
ƒ Output voltage programmable from 0.6Vdc to
5.5Vdc via external resistor. Digitally adjustable
down to 0.45Vdc
ƒ Digital interface through the PMBusTM # protocol
ƒ Tunable LoopTM to op timize dynamic output
voltage response
ƒ Flexible output voltage sequencing EZ-
SEQUENCE
ƒ Power Good signal
ƒ Fixed switching frequency with capability of
external synchronization
ƒ Output overcurrent protection (non-latching)
ƒ Overtemperature protection
ƒ Remote On/Off
ƒ Ability to sink and source current
ƒ Cost efficient open frame design
ƒ Small size: 12.2 mm x 12.2 mm x 7.25 mm
(0.48 in x 0.48 in x 0.29 in)
ƒ Wide operating temperature range [-40°C to 85°C]
ƒ UL* 60950-1Recognized, CSA†† C22.2 No.
60950-1-03 Certified, and VDE‡‡ 0805:2001-12
(EN60950-1) Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The 6A Digital Pico DLynxTM power modules are non-isolated dc-dc converters that deliver up to 6A of output
current. These modules operate over a wide range of input voltage (VIN = 3Vdc-14.4Vdc) and provide a precisely
regulated output voltage from 0.45Vdc to 5.5Vdc, programmable via an external resistor and further adjustable
through PMBus. Features include a digital interface using the PMBus protocol, remote On/Off, adjustable output
voltage, over current and overtemperature protection. The PMBus interface supports a range of commands to control
and monitor the module. The Tunable LoopTM feature allows the user to optimize the dynamic response of the
converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area.
* UL is a registered trademark of Underwriters Laboratories, Inc.
†† CSA is a registered trademark of Canadian Standards Association.
‡‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
# The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
Document No: DS11-008 ver. 0.33
PDF name: PDT006A0X.pdf