E6719J Datasheet, PDF (9/16 Pages) Keysight Technologies – E6706G 1xEV-DO Lab Application

09 | Keysight | E6706G 1xEV-DO Lab Application - Technical Overview
1xEV-DO default packet application (continued)
Default packet application (continued)
IP throughput monitor
Displays a graph of the data throughput for forward and
reverse packets at the IP layer, and at the RLP layer
IP throughput numeric results
Provides numeric results for the current, average, and peak
data rates in bits per second as well as total number of bytes
transferred for forward and reverse IP packets and forward and
reverse OTA (over-the-air-RLP) packets
IP throughput display axis
controls
Time span
Start data rate
Stop data rate
0 to 600 seconds
0 to 4999 kbps
0 to 5000 kbps
IP throughput trace controls
On/Off function and marker function for IP Tx trace, IP Rx trace,
OTA (RLP) Tx trace, and OTA (RLP) Rx trace
IP throughput graph controls
Clear display and freeze display
Ping function
Allows the user to test network connections required
for default packet capability. Reports number of packets
transmitted, number of packets received, percent lost, and
round trip time minimum/average/maximum
Mobile IP support
The E6706G supports two solutions for mobile IP support. The
first is basic functionality that does not require any external
devices. The 8960 Series 10 processes the reverse mobile IP
related messages and generates corresponding forward mobile
IP messages in order for the AT to pass mobile IP registration.
The second solution provides support for Software Concepts
Inc’s mobile IP simulator models MIP-5800 MOB-IP-SIM
or MIP-5850 MOB-IP-SIM. User control for internal simple
IP support or external mobile IP support for default packet
operation. Interfaces to the mobile IP simulator through the
test set’s LAN port. When in external mobile IP mode, the
test set sends the data out through the LAN port in PPP over
Ethernet format
Mobile IP functions
Internal mobile IP state
Sets whether simple IP or mobile IP is used. Settable to On
or Off. External PDSN state must be set to Off for this to take
effect
Home agent shared secret (Hex)
External PDSN state
External PDSN IP address
External PDSN TCP port
Sets the secret key used in mobile IP authentication procedure.
Must match the MN-HA (mobile node – home agent) secret
programmed by the AT
On or Off. When On, outputs PPP data via the LAN connector
to the external MIP-5800 or MIP-5850 mobile IP simulators
Accepts IPv4 standard address
0 to 65535
Instrument IP addresses
User parameters
Displays
IPv6 prefix, IPv6 default router address
IPv6 link-local prefix, LAN IPv6 IID (derived from MAC ID), LAN
2 IPv6 IID (derived from MAC ID)
Data channel addresses
Data channel parameters
DUT IPv6 IID
DUT IPv6 DNS server prefix, DUT IPv6 DNS server IID, DUT
IPv6 P-CSCF server (SIP proxy) prefix, and DUT IPv6 P-CSCF
server (SIP proxy) IID automatically set by the test set, no user
entry