|
E6719J Datasheet, PDF (2/16 Pages) Keysight Technologies – E6706G 1xEV-DO Lab Application | |||
|
◁ |
02 | Keysight | E6706G 1xEV-DO Lab Application - Technical Overview
Achieve reliable high data rate testing results and gain confidence in
your 1xEV-DO wireless access terminals
As the first one box test set solution to support 1xEV-DO, 1xEV-DO Release A, Release
B, and eHRPD, the Keysight Technologies, Inc. E6706G 1xEV-DO lab application in
conjunction with the 8960 Series 10 (E5515C/E) wireless communications test set
provides a wide range of parametric and functional test capabilities for 1xEV-DO. The
E6706G is designed for use in many stages of the mobile device development lifecycle,
with the capacity to meet both RF and functional testing needs. This test solution
improves the problem-solving efficiency of R&D engineers who design, integrate, verify,
and validate leading-edge 1xEV-DO wireless access terminals (ATs).
Key Features
ââ Supports 1xEV-DO Release 0 and Release A default packet application for IP-based
application test and verification
ââ Supports 1xEV-DO Release 0 FTAP/RTAP, Release A FETAP/RETAP, and Release
B FMCTAP and RMCTAP call processing for accurate physical layer performance
qualifications
ââ Release B functionality for testing access terminals that support multicarrier
operation and the new subtype 3 physical layer used in 1xEV-DO Release B
ââ Release A default packet application support enables data throughput testing
with speeds up to 3.1 Mbps on the forward link and 1.8 Mbps on the reverse link
ââ Protocol logging with the included wireless protocol advisor PC software provides
detailed logs at multiple layers in the 1xEV-DO protocol stack for quick debugging of
protocol issues
ââ High precision, all digital I/Q baseband fading using the Keysight external Baseband
Studio solution (requires incremental hardware) provides all defined fading profiles
for 1xEV-DO with digital repeatability and accuracy
ââ Basic mobile IP support in the test set is enabled in the E6706G. Full mobile IP
protocol test support through use of the Software Concepts MOB-IP-SIM with
the E6706G lab application
ââ IS-856 test mode allows receiver and transmitter testing without call processing
ââ Keysight two-box solution (the new Keysight E7515A UXM wireless test platform,
and E5515C/E) supports non-optimized/optimized handover from LTE to eHRPD
with enhanced eHRPD functionality
Whatâs New?
ââ Settable UATI and UATI subnet mask
ââ Two additional settable P-CSCP IP addresses
ââ Six additional frequency bands for 1xEV-DO
|
▷ |