E6704A Datasheet, PDF (9/15 Pages) Keysight Technologies – E6702G cdma2000/IS-95/AMPS

09 | Keysight | E6702F cdma2000/IS-95/AMPS Lab Application - Technical Overview
Protocol logging functionality
E6702G logging functions
Protocol support
Wireless Protocol Advisor (WPA)
Logging software
WPA hardware requirements
WPA supported operating systems
WPA connection
WPA operating modes
WPA display modes
Traffic overview functionality
Display
Traffic overview configurable display
columns
Measurement setup functionality
Display
Decode view functionality
Decode view displayed information types
Test set information (indicated by blue text)
Message contents (indicated by green text)
Decode view configurable display columns
Test filter functionality
WPA test set filter
Test set filter message types
Start protocol logging and stop protocol logging
PREV=6 and PREV=7 messages; provides correct binary output for
lower PREVs, but decodes using PREV=6 messages formats
Keysight Wireless Protocol Advisor PC software included with the
purchase of the E6702G
At least a Pentium III 700 MHz PC with 128 MB of memory, 500 MB
of free disc space, and a TCP/IP LAN port
English versions of Windows 98, Windows NT 4.0 (with at least
service pack 4), and Windows 2000
A 10 Mbps 10 Base T Ethernet connection (RJ-45 connector) using
a crossover cable for direct connection to the PC or with a standard
cable through a switch or hub
Real time or post capture
Traffic overview of real-time messages, decode view with full detail
of selected message, measurement setup view for trigger, and filter
configuration
Provides a single line display of individual protocol messages in
sequential order as received
Message number, message direction, CDMA system time, event
type, timestamp (based on PC’s real-time clock), channel type, L2
message, L3 message, and order
Provides a graphical block diagram of the available test set filters,
triggers, real-time filters, data log, and post-capture filters available
to the user; also displays whether any triggers or filters are currently
selected
(20 ms), event type (PDU or duplicate PDU), and channel type CDMA
system time message was sent or received with frame accuracy
Individual octet display of message or line per field display of each
parameter in the message
Octet number, decimal value, binary value, hex value, and field
description (English)
Selectable list of message types to be sent from the test set to the
logging PC via the LAN connection; message types not selected are
NOT transmitted to the PC
Sync channel messages, overhead messages, mobile station
directed messages, access channel messages, forward traffic
channel messages, reverse traffic channel messages, forward
fundamental channel frames, reverse fundamental channel frames,
and quick paging channel slots