E6704A Datasheet, PDF (13/15 Pages) Keysight Technologies – E6702G cdma2000/IS-95/AMPS

13 | Keysight | E6702F cdma2000/IS-95/AMPS Lab Application - Technical Overview
Cell 1 overhead channels (Control channels = BCCH/CCCH/ EACH) (continued)
F-BCCH
With real-time overhead messages
F-CCCH
With real-time signaling messages
F-QPCH
Indicates if active page will be in the next paging channel slot
IS-2000 test mode functionality
Cell 2 overhead channels
F-pilot: With settable PN offset
Cell 1 overhead messages
(Control channels = PCH/ACH)
System parameters message, channel list message, access
parameters message, extended system parameters message, and
extended neighbor list message
Cell 1 overhead messages
(Control channels = BCCH/CCCH/ EACH)
ANSI-41 system parameters message, MM-RC parameters mes-
sage, extended channel list message, enhanced access parameters
message, and universal neighbor list message
F-BCCH rate
(Control channels = BCCH/CCCH/ EACH)
4.8 kbps (1/2 rate coding, 160 ms slot), 9.6 kbps (1/2 rate coding,
80 ms slot), or 19.2 kbps (1/2 rate coding, 40 ms slot)
F-CCCH rate
(Control channels = BCCH/CCCH/ EACH)
9.6 kbps (1/4 rate coding, 20 ms frame), 9.6 kbps (1/2 rate coding,
20 ms frame), and 19.2 kbps (1/2 rate coding, 20 ms frame)
F-QPCH data rate
Selectable from either full or half rate
Base station parameters
NID, SID, country code (MCC), network code (MNC), paging rate, and
CDG esc mode, F-QPCH state, F-QPCH relative level, F-QPCH data
bits (all on or all off), and reverse link traffic pilot gain
Call control (“one button commands”)
None
Access parameters
None
Registration support
None
Service option support
None
Handoff support
None
R-Access channel
Not supported
Chip rate
1.2288 Mcps
Supported radio configuration combinations
–– Forward RC1 + reverse RC1
–– Forward RC2 + reverse RC2
–– Forward RC3 + reverse RC3
–– Forward RC4 + reverse RC3
–– Forward RC5 + reverse RC4
–– Forward RC11 + reverse RC8
Channel coding
Convolutional or turbo on all rates with the exception that turbo
coding is not available on RC3 at 9.6 kbps, RC4 at 9.6 kbps, or RC5
at 14.4 kbps per IS-2000
Traffic data source
PRBS (CCITT 215-1 pattern)
Forward FCH data rate
RC1: Random (40% duty cycle), 1.2, 2.4, 4.8, 9.6 kbps
RC2: Random (40% duty cycle), 1.8, 3.6, 7.2, 14.4 kbps
RC3: Random (40% duty cycle), 1.5, 2.7, 4.8, 9.6 kbps
RC4: Random (40% duty cycle), 1.5, 2.7, 4.8, 9.6 kbps
RC5: Random (40% duty cycle), 1.8, 3.6, 7.2, 14.4 kbps
Forward SCH support
One supplemental channel
RF-SCH data rate
C3: 9.6, 19.2, 38.4, 76.8, or 153.6 kbps
RC4: 9.6, 19.2, 38.4, 76.8, or 153.6 kbps
RC5: 14.4, 28.8, 57.6, 115.2, or 230.4 kbps
Power control groups
16 per frame
Reverse link closed loop support
Transmits bits only (no reverse link demodulation)
Reverse link closed loop bit rate
Fixed to 800 per second
Cell 1 reverse link closed loop power control
modes
–– Alternating – alternating 0 and 1 power bits
–– Alt 20 up/down – alternating 20 up/20 down bits
–– All up
–– All down