Y9071B Datasheet, PDF (26/29 Pages) Keysight Technologies – Measurement Applications For the E6640A EXM Wireless Test Set

26 | Keysight | Measurement Applications for the E6640A EXM Wireless Test Set - Solution Brochure
Digital video
Receiver test
Keysight N7624B Signal Studio helps you simplify digital video signal creation for
receiver measurement and the EXM TRX transmits the digital video signals from the
vector signal generator to the DUT. EXM provides receiver testing solutions for various
digital video, e.g. ISDB-T, DTMB, DVB-S/S2/T2, and CMMB. N7624B supports up to the
frequency range of the ordered TRX.
Table 14. Digital video support by EXM
Test objective
Tests covered
Licensing
GDigital video receiver test
Generate digital video waveform files for
–– Advanced ATSC-M/H
–– Advanced BER tools
–– Advanced DVB-T/H/C/J.83 Annex A/C
–– Advanced ISDB-T
–– Advanced DTMB
–– Advanced ATSC
–– Advanced DVB-S
–– Advanced DVB-S2
–– Advanced CMMB
–– Advanced DVB-T2
Receiver test
The satellite waveform files can be used with waveform
5-pack or 50-pack licenses
General Purpose
Analog demodulation is one of the general purpose X-Series measurement applications
leveraged to enable EXM to expedite the development and manufacturing of various
transmitting devices. Supported one-button measurements include all of the modulation
quality plus I/Q waveform measurements.
Analog demodulation
–– Modulation analysis for AM, FM, and PM signals
–– Analyze analog modulation signals with a selection of detectors: Peak+, Peak-,
(Pk-Pk)/2, and RMS
–– View RF spectrum, demodulated waveform, AF (modulating signal) spectrum, and
demodulation metrics table at the same time with quad view
Figure 16. V9063B analog
demodulation measurements,
quad view