Y9071B Datasheet, PDF (23/29 Pages) Keysight Technologies – Measurement Applications For the E6640A EXM Wireless Test Set

23 | Keysight | Measurement Applications for the E6640A EXM Wireless Test Set - Solution Brochure
Figure 15. V9081B Bluetooth EDR measurements
Receiver test
Keysight N7606B Signal Studio helps you simplify Bluetooth signal creation for receiver
measurements and EXM TRX provides support for the transmission of Bluetooth RF
signals from the vector signal generator to the DUT.
Table 12. Bluetooth receiver tests
Bluetooth receiver test
Test items
RCV/CA/01/C
Output power
RCV/CA/02/C
RCV/CA/03/C
RCV/CA/04/C
RCV/CA/05/C
RCV/CA/06/C
Sensitivity/single-slot packets
Sensitivity/multi-slot packets
C/I performance¹
Blocking performance¹
Intermodulation performance¹
RCV/CA/07/C
RCV/CA/08/C
Maximum input level
EDR sensitivity
RCV/CA/09/C
RCV/CA/010/C
RCV-LE/CA/01/C and 02/C
EDR BER floor performance
EDR C/I performance¹
EDR maximum input level
RCV-LE/CA/03/C
RCV-LE/CA/04/C
RCV-LE/CA/05/C
RCV-LE/CA/06/C
RCV/CA/07/C
Sensitivity test
C/I and receiver selectivity performance¹
Blocking performance¹
Intermodulation performance¹
Maximum input signal level PER report integrity
KEY
Identifier format is: (Test)/CA/NN/C, in which
TRM = Transmitter test
CA = Capability test (defines the type of
testing)
NN = Test purpose number
C = Conformance test performed on
dedicated Bluetooth test system
1.  Requires an additional signal source with Bluetooth capability for the interfering signal.