Y9071B Datasheet, PDF (11/29 Pages) Keysight Technologies – Measurement Applications For the E6640A EXM Wireless Test Set

11 | Keysight | Measurement Applications for the E6640A EXM Wireless Test Set - Solution Brochure
GSM/EDGE/EDGE Evo
Transmitter test
Keysight V9071B X-Series measurement application for GSM/EDGE/EDGE Evo supports
standard-based measurements per the 3GPP GERAN standard. Transmitter characteri-
zation measurements include:
GSM/EDGE measurements
–– Transmit power and power vs time (PvT) with multi-slot capability
–– Error vector magnitude (EDGE only), and phase and frequency error (GSM only)
through polar vector and constellation displays
EDGE Evo measurements
–– Normal burst (NB) support: GMSK, 8PSK, 16QAM, and 32QAM
–– High symbol rate (HSR) burst support: QPSK, 8PSK, 16QAM, and 32QAM including
spectrally-narrow and wide-pulse shaping Tx filter
–– Auto-detection and synchronization for all modulation formats including mixed slots
containing NB and HSR bursts, plus enhanced trigger hold-off setting for stable
burst detection
Receiver test
Typical measurements for manufacturing or design validation include:
–– Reference level sensitivity
–– Maximum input level
–– Adjacent channel selectivity
–– Intermodulation
Keysight N7602B Signal Studio Software for GSM/EDGE/EDGE Evo provides a high
degree of flexibility in waveform creation, including:
–– Single- and multi-carrier GSM, EDGE, and EDGE Evo signals
–– Advanced mode for Rx test with transport-channel coding
–– Mixed GSM, EDGE, and EDGE Evo carriers and timeslots
Figure 6. V9071B GSM/EDGE/EDGE Evo channel power