Y9071B Datasheet, PDF (10/29 Pages) Keysight Technologies – Measurement Applications For the E6640A EXM Wireless Test Set

10 | Keysight | Measurement Applications for the E6640A EXM Wireless Test Set - Solution Brochure
LTE/LTE-Advanced TDD
Transmitter test
Keysight V9082B X-Series measurement application for LTE/LTE-Advanced TDD
supports all LTE TDD bandwidths: 1.4 to 20 MHz. The V/Y9082B application supports
3GPP LTE TDD transmitter characterization measurements including:
–– Channel power
–– Occupied bandwidth
–– Frequency error
–– ACP/ACLR/CACLR
–– Spectrum emission mask
–– EVM
–– Transmit On/Off power
–– Modulation analysis
–– Conformance EVM
–– I/Q offset
–– In-band emissions
Receiver test
Typical measurements for manufacturing or design validation include items such as:
–– Reference level sensitivity
–– Maximum input level
–– Adjacent channel selectivity
–– Intermodulation
Keysight N7625B Signal Studio Software for LTE/LTE-Advanced FDD provides a high
degree of flexibility in waveform creation, including:
–– Single- and multi-carrier LTE/LTE-
Advanced TDD signal generation
–– Basic mode for Tx design and verification
–– Advanced mode for Rx test with transport-channel coding
Figure 5. V9082B LTE/LTE-Advanced TDD modulation analysis