N1045A Datasheet, PDF (21/37 Pages) Keysight Technologies – Wide-Bandwidth Oscilloscope Mainframe and Modules

21 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet
Modules Specifications (Continued)
Dual electrical (Continued)
Clock recovery
Data rate input range (continuous tuning)
Clock frequency input range (continuous
tuning)
Minimum input level to aquire lock
Recovered clock random jitter (used as
internal trigger) ¹
Clock recovery adjustable loop bandwidth
range (user selectable)
Clock recovery loop peaking range
Loop bandwidth accuracy
Tracking range (includes spread spectrum
tracking)
Aquisition range
Maximum consecutive identical digits to lock
Auto relocking
Residual spread spectrum
Front panel recovered clock amplitude
Front panel recovered clock divide ratio
(user selectable)
Recovered clock front panel connector type
Internal frequency counter accuracy
86108A
0.05 to 14.2 Gb/s (requires FW
revision 8.1 or higher)
0.025 to 6.75 GHz
86108B-216
0.05 to 16 Gb/s
0.025 to 8 GHz
86108B-232
0.05 to 32 Gb/s
0.025 to 16 GHz
175 mV_pp
Internal recovered clock trigger
< 500 fs at 2 Gb/s
< 400 fs at 5 and 10 Gb/s
0.015 to 10 MHz
175 mV_pp
175 mV_pp
< 350 fs at data rate < 2 Gb/s
< 300 fs at data rate ≥ 2 Gb/s
0.015 to 20 MHz
< 350 fs at data rate < 2 Gb/s
< 300 fs at data rate ≥ 2 Gb/s
0.015 to 20 MHz
Up to 4 settings (dependent on loop BW)
± 30%
± 2500 ppm ± 0.25%
± 5000 ppm
150
If signal lock is lost, system can automatically attempt to regain phase-lock.
User selectable to enable/disable
–72 ± 3 dB at 33 kHz
–84 ± 3 dB at 33 kHz
–84 ± 3 dB at 33 kHz
0.15 to 1.0 Vpp (0.3 to 1.0 Vpp)
1, 2, 4, 8, 16
1, 2, 4, 8, 16
1, 2, 4, 8, 16
2, 4, 8, 16
2, 4, 8, 16
2, 4, 8, 16
SMA
± 10 ppm
1.  These values indicate performance with the internal precision timebase disabled. With precision timebase enabled, system jitter performance is
dramatically decreased. See page 9.
Phase trimmers
Nominal impedance
Frequency range
Insertion loss (at f max)
Time delay
Connectors
86108B-PT3 (= qty 2 N1027A-PT3)
50 Ω
DC to 26 GHz
0.8 dB
238 to 293 ps
SMA (m-f)
86108B-PT2 (= qty 2 N1027A-PT2)
50 Ω
DC to 50 GHz
0.8 dB
172 to 195 ps
2.4 mm (m-f)