2000 Datasheet, PDF (18/24 Pages) Make-Ps – Single, Dual, Triple Output DC/DC Converter

18 | Keysight | InfiniiVision 2000 X-Series Oscilloscopes - Data Sheet
Performance Characteristics (Continued)
WaveGen – built-in function generator (Specifications are typical)
Waveforms
Sine, square, pulse, triangle, ramp, noise, DC
Sine
–– Frequency range: 0.1 Hz to 20 MHz
–– Amplitude flatness: ± 0.5 dB (relative to 1 kHz)
–– Harmonic distortion: –40 dBc
–– Spurious (non harmonics): –40 dBc
–– Total harmonic distortion: 1%
–– SNR (50 Ω load, 500 MHz BW): 40 dB (Vpp ≥ 0.1 V); 30 dB (Vpp <0.1 V)
Square wave/pulse
–– Frequency range: 0.1 Hz to 10 MHz
–– Duty cycle: 20 to 80%
–– Duty cycle resolution: Larger of 1% or 10 ns
–– Pulse width: 20 ns minimum
–– Pulse width resolution: 10 ns or 5 digits, whichever is larger
–– Rise/fall time: 18 ns (10 to 90%)
–– Overshoot: < 2%
–– Asymmetry (at 50% DC): ± 1% ± 5 ns
–– Jitter (TIE RMS): 500 ps
Ramp/triangle wave
–– Frequency range: 0.1 Hz to 100 kHz
–– Linearity: 1%
–– Variable symmetry: 0 to 100%
–– Symmetry resolution: 1%
Noise
Bandwidth: 20 MHz typical
Frequency
–– Sine wave and ramp accuracy:
–– 130 ppm (frequency < 10 kHz)
–– 50 ppm (frequency > 10 kHz)
–– Square wave and pulse accuracy:
–– [50+frequency/200] ppm (frequency < 25 kHz)
–– 50 ppm (frequency ≥ 25 kHz)
–– Resolution: 0.1 Hz or 4 digits, whichever is larger
Amplitude
–– Range:
–– 20 mVpp to 5 Vpp into Hi-Z
–– 10 mVpp to 2.5 Vpp into 50 Ω
–– Resolution: 100 µV or 3 digits, whichever is larger
–– Accuracy: 2% (frequency = 1 kHz)
DC offset
–– Range:
–– ± 2.5 V into Hi-Z
–– ± 1.25 V into 50 ohms
–– Resolution: 100 μV or 3 digits, whichever is larger
–– Accuracy: ± 1.5% of offset setting ± 1.5% of amplitude ± 1 mV
Trigger output
Trigger output available on Trig out BNC